Finite Element Modeling of Pullout Test on Geogrid Embedded in Pluviated and Compacted layer of Sand
Publish place: The First Iranian Conference on Geotechnical Engineering
Publish Year: 1392
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,176
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
GEOTEC01_010
تاریخ نمایه سازی: 9 بهمن 1392
Abstract:
Reinforcements like bars, strips, textiles and grids are used for the reinforcement of soil walls, but the useof grids type of reinforcements is still under consideration and there is still a need of study the probableuse of grids reinforcement in reinforced soil retaining walls. Pullout test is commonly used to predictactual field pullout behavior of reinforcements. In this paper, pullout test modeled with geogridreinforcements embedded sand, clay and clay with thin layers of sand, under five different normalpressures of 5,25,50,75 kPa and 100 kPa. Finite element method (Plaxis V8) is used to compare thepullout behavior results. Normal pressures modeled and an optimum sand layer thickness wasdetermined. Effect of sand layers combined with the geogrid reinforcement increased with increasing innormal pressures. The improvement was more pronounced at higher normal pressures. Test resultsindicate that provision of thin layers of sand on both sides of the geogrid is very effective in improving thepullout strength
Keywords:
Authors
M.R Abdi
Associate Professor, Faculty of Civil Engineering, KNT University, Tehran, Iran
A.R Zandieh
PhD Student, Faculty of Civil Engineering, KNT University, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :