Investigation of flow field around flanged hoods with Rectangular and Circular cross-sections
Publish place: 14th Annual Conference of Mechanical Engineering
Publish Year: 1385
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,767
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME14_492
تاریخ نمایه سازی: 1 فروردین 1386
Abstract:
In order to control the concentration of pollutants in the industrial workrooms and laboratories, local ventilation systems are widely used. Hood is the most important part of this system that has various types. Investigating the flow field around the hood and the induced velocity at a specified distance from the hood opening is of special importance in designing of hood. In this paper, the airflow around flanged hood’s opening with both circular and rectangular cross-sections has been modeled using computational fluid dynamics (CFD). Numerical modeling is accomplished assuming inviscid flow and the result is compared with that of potential correlations exist for circular and rectangular openings. The comparisons show good agreement. At the next step the flow field has been analyzed using , RNG turbulence model. Results of this case show that although there are differences in velocity vector magnitudes near the opening, generally there is a very small deviation from that of potential flow at centerline. But for points far from the centerline, deviation is significant because of the viscosity and boundary layer effects near the wall. Therefore, considering the real flow field and turbulence for modeling airflow around flanged hoods opening is inevitable.
Keywords:
Hood - Local Ventilation Systems – CFD - Turbulence - Potential Solution
Authors
Shervani Tabar
assistant professor, School of Mechanical Engineering, Tabriz University, Tabriz, Iran
Javareshkian
Assistant professor School of Mechanical Engineering, Tabriz University, Tabriz, Iran
Zamzamian
Ph.D studentd, School of Mechanical Engineering, Tabriz University, Tabriz, Iran
Dadvand
Ph.D studentd, School of Mechanical Engineering, Tabriz University, Tabriz, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :