SIMULATION AND OPTIMIZATION OF WORKING CONDITIONS DURING PUSH BENDING PROCESS
Publish place: 15th Annual Conference of Mechanical Engineering
Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,587
This Paper With 5 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_490
تاریخ نمایه سازی: 8 فروردین 1386
Abstract:
Push bending process is one of the methods used for bending tubular parts. It is a suitable technique to make considerably small bending radii. The method is performed using a rigid die to guide and form the tube into the required shape while being pushed by a punch. A pressure media is used within the tube to prevent wrinkling and buckling. The hyper-elastic (rubber) materials are commonly used as the pressure media. This paper presents the pressure distribution within the tube, during push bending process. Effect of rubber properties on the tube quality is also studied. Finally optimum working conditions of process is predicted by the finite element method and is compared with previously published experimental observations.
Keywords:
Authors
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :