Experimental Study on the Operational Factors that Affect the Oil Content of the Wax during Dewaxing Process by Adopting DOE Method
Publish place: 07th International Congress on Chemical Engineering
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 617
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_645
تاریخ نمایه سازی: 25 فروردین 1394
Abstract:
The oil content of the waxes produced in dewaxing process is the key economical parameter that should be reduced as low as possible. Some factors such as the type of solvents, cooling rate, temperature and solvent to oil ratio influence the dewaxing process. Due to the fact that crude oildiffers from place to place and as such the operational conditions for wax extraction vary from crude to crude, the objective of this work is to study the operational conditions for wax production from an Iranian raffinate used in Sepahan Oil Company. All the experiments are conducted basedon design of experiment technique (DOE) for minimizing the oil content of the wax produced. The effects of the five factors have been determined quantitatively and appropriate levels are suggested for reducing the oil content. The results show that the solvent ratio and solvent composition and cooling rate have the most important role in minimizing the oil content of produced waxes.
Keywords:
Authors
m.h eghbali
Chem. Eng. Dept, University of Isfahan, Isfahan, Iran
t tavakoli
Chem. Eng. Dept, University of Isfahan, Isfahan, Iran
a.r Solaimany Nazar
Chem. Eng. Dept, University of Isfahan, Isfahan, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :