An Investigation on the Effect of Adherent Thickness on FailureLoads in an Adhesive Joint
Publish place: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4)
Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 826
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT04_075
تاریخ نمایه سازی: 22 مهر 1394
Abstract:
In this paper, the effect of adherent thickness (T) on the failure loads of single lap adhesive joints has been investigated in two parts, based on a new failure criterion. At the first part, the failure loads of single lap adhesivejoints with similar geometries but different bonding lengths are predicted based on the new method. According to the criterion, the joints will fail if the longitudinal strain along the adhesive mid-plane reaches a critical value at a criticaldistance. The critical longitudinal strain and the critical distance are the two material and geometrical constants. In the second part, the method is employed to predict the failure load of single lap adhesive joints with similar geometries but different adherent thicknesses and bonding lengths. According to the results, the critical strain changes for differentvalues of adherent thickness but the critical distance remains constant. It is shown that the predictions based on the proposed criterion have good agreement with the experimental data.
Keywords:
Authors
A. Akhavan Safar
PhD student, Department of Mechanical Engineering, University of Science and Technology, Narmak, Tehran, Iran
M. R. Ayatollahi
Professor, Department of Mechanical Engineering, University of Science and Technology, Narmak, Tehran, Iran