Drying Kinetics and Thermal Properties of Polymer Latex Coating Used in Lost foam Casting
Publish place: 5th International Congress on Chemical Engineering
Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,861
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_281
تاریخ نمایه سازی: 7 بهمن 1386
Abstract:
In this study, the drying kinetics and thermal properties of three latexes (pure acrylic polymer latex(MP 36), styrene-acrylic copolymer latex (MS 28) and PVA latex ) have been compared. For Thermal investigation the Thermal Gravimetric/Differential Thermal Analysis (TG/DTA) method
has been used. The results indicate that all the samples have approximately the same degradation temperature like expandable polystyrene (EPS) and styrene-methylmetacrylate (St-MMA) lost foams. Diagrams of drying process of latexes show three different stages. The results show that drying time has an inverse relation with temperature. In fact drying time decreases with increasing of the temperature. The latexes have different cumulative water loss because of different water diffusion coefficients.
Keywords:
Authors
Shakoori
Research Center for Polymeric Materials, Sahand University of Technology,Tabriz, Iran
Rezaei
Research Center for Polymeric Materials, Sahand University of Technology,Tabriz, Iran
Abbasi
Research Center for Polymeric Materials, Sahand University of Technology,Tabriz, Iran
Esmaeilnezhad
Research Center for Polymeric Materials, Sahand University of Technology,Tabriz, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :