Modeling of Wind Energy Conversion System Including DFIG for Distributed Generation Studies
Publish place: Journal of Iranian Association of Electrical and Electronics Engineers، Vol: 7، Issue: 2
Publish Year: 1389
نوع سند: مقاله ژورنالی
زبان: English
View: 406
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JIAE-7-2_007
تاریخ نمایه سازی: 13 تیر 1396
Abstract:
A detailed model of wind power station, including Double Fed Induction Generator, DFIG is presented in this paper. Two control mechanisms are included in the model. The inner control system uses stator flux oriented control for the rotor side converter and grid voltage vector control for the grid side converter. The outer control system is used for wind turbine pitch angle. PSCAD/EMTDC is used for the simulation. The simulation model is used to investigate the performance of controllers under wind speed variations, short circuit at the grid side and dynamics of active power demand.
Keywords:
Authors
S Ghassem Zadeh۱
PhD Student, Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
S. H. Hosseini
Professor, Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
G.B. Gharehpetian
Professor, Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran