سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

COMPARISON OF DIFFERENT CURING EFFECTS ON CONCRETE STRENGTH

Publish Year: 1388
Type: Conference paper
Language: English
View: 2,616

This Paper With 10 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

ICCD03_038

Index date: 11 October 2008

COMPARISON OF DIFFERENT CURING EFFECTS ON CONCRETE STRENGTH abstract

The purpose of this investigation was to conduct a laboratory test program on how much different curing conditions affect the attainable strength of concrete. To achieve this purpose, a laboratory test program was conducted. The laboratory program consisted of casting 150 mm by 150 mm concrete cubes using eight different mix designs and subjecting them to six different curing conditions. In order to investigate the influence of curing conditions, on the compressive strength of concrete cubes, for each mix design three cubes were chosen for every curing regime. The curing regimes employed were: immersion in drinking water; covering with wet hessian and polythene sheet; keeping under dry laboratory conditions; keeping in open air; curing compound and steam curing. Except for steam curing system, the specimens of which were tested at the age of three days, for all other curing conditions, the compression tests were performed at the age of 28 days. It has been found that the curing system greatly influences the concrete strength. While the highest gain in compressive strength was recorded for cubes covered with wet Hessian and polythene sheet, the lowest gain in compressive strength was recorded for the specimens cure using steam curing.

COMPARISON OF DIFFERENT CURING EFFECTS ON CONCRETE STRENGTH Keywords:

COMPARISON OF DIFFERENT CURING EFFECTS ON CONCRETE STRENGTH authors

M Naderi

Associate. Prof., Imam Khomeini International University, Head of Civil. Eng. Dept., Takestan Azad University

R Sheibani

P. G. Student, Civil Eng. Dept. Takestan Azad University

M. A. Shayanfar

School of Civil Engineering, Iran University of Science and Technology, Tehran,

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
MATHER, B. (1990).، How to make concrete that will be ...
Accelerated Curing of Concrete at Atmospheric Pres sure-State of the ...
Time of Setting of Concrete Mixtures by Penetration Resistance, ASTM ...
Fitz Gibbon, M.E., 1976: Large pours for reinforced concrete structures. ...
FITZ GIBBON, M.E., 1976: Large pours-2, heat generation and control. ...
Gopalan, M.K., and Haqua, M. N., 1987: Effect of curing ...
Pfeifer, Donald, W. and Marusin, Stella, *Energy Efficient Accelerated Curing ...
BS 1881: Part 116, Method for determination of compressive strength ...
نمایش کامل مراجع