Numerical study of the various parameters effects in impinging jet heat transfer
Publish place: 25th Annual Conference of Mechanical Engineering
Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 436
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME25_152
تاریخ نمایه سازی: 13 شهریور 1396
Abstract:
Effects of jet inlet geometry and Reynolds number on localand average heat transfer characteristics of two confinedimpinging jets have been investigated numerically by usinga 3D k-ε model. Simulations were performed for two jet exitgeometries including circular and rectangular jets fordimensionless jet to plate distances 2,6 10.As the Reynolds number increases, heat transferenhancement was obtained at stagnation region. As a resulthigher Reynolds number jets can be used as an enhancementtechnique for localized heating or cooling. Wall jet regioncomprises very large portion of the impinging plate understudy and generally lower heat transfer rates were attained inthis region. Also with increasing jet to plat distance , heattransfer enhancement was observed at stagnation point. withincreasing x value at wall jet region, very similar heattransfer characteristics were observed for two jets.
Keywords:
Confined impinging jets – stagnation region – heat transfer– turbulence model
Authors
Kamiar Zamzamian
Associate professor at Islamic Azad University of Tabriz, Department of Mechanical Engineering, Tabriz Branch, Islamic Azad University, Tabriz, I. R. Iran
Mohammad Mardani
Student at Islamic Azad University of Tabriz, Department of Mechanical Engineering, Tabriz Branch, Islamic Azad University, Tabriz, I. R. Iran