Bioleaching: Extract metals from solid waste using microbes

Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 415

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJHLS-2-2_001

تاریخ نمایه سازی: 1 مرداد 1397

Abstract:

Various processes for the extraction of metals from solid waste including hydrometallurgy and pyrometallurgy have been reported. These processes require large amounts of chemicals, high operating cost and also are difficult and complicated operation with low recovery. Legislation on environmental protection and increased environmental concerns limit the application of these technologies. It is essential to develop new technologies for extracting metals from solid waste that have higher recovery rates and also decreased pollution. In place of traditional extraction methods, it is possible to use bioleaching to recover valuable metals from solid waste. Bioleaching has the advantage of simplicity, low energy input, low capital cost, mild operating conditions, does not require specialized labor and is environmentally friendly. It is based on theinteraction of microorganisms with metal sources for the transformation of organic or inorganic acids (protons), oxidation and reduction reactions and the excretion of complexing agents. Bioleaching uses mesophile, moderate thermophile and extreme thermophile bacteria to dissolve metals from solid waste. Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans and Thiobacillus thioparus are the most common bacteria used in bioleaching. Additionally, some species of fungi like Aspergillus niger, Penicillium simplicissimum and Penicillium chrysogenum have been successfully employed in bioleaching of various heavy and valuable metals from solid wastes.Nowadays bioleaching leads to extract precious and rare earth elements metals from different solid waste like spent catalysts, electronic scraps, rechargeable batteries, red mud, coal and fly ash and municipal waste incineration fly ash. Results show it could recovery metals with high potential. Often bioleaching recovery efficiencies received to 80 to 90%. Additionally, the application of bioleaching techniques for the treatment of solid wastes might contribute to detoxification and conversion hazardous solid waste towards a more sustainable and environmental friendly economy.

Authors

Seyed Omid Rasteagar

Department of Engineering, Chemical Engineering Group, University of Kurdistan, Sanandaj, Iran.

Reza Katal

Department of Civil & Environmental Engineering, National University of Singapore, Singapore, Singapore. Singapore

Marius Sebastia Secula

Chemical Engineering Department, Faculty of Chemical Engineering and Environmental Protection, Technical University of Iași, Iasi, Romania.

Fabricio Motteran

Department of Hydraulics and Sanitation, Engineering School of São Carlos, University of São Paulo (USP), Brazil.