Improvement the Efficiency of CIGS Thin Film Solar Cells by Changing the Doping of the Absorbent Layer and Adding the InAsP Layer
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 468
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JECEI-6-1_002
تاریخ نمایه سازی: 21 خرداد 1398
Abstract:
In this article, the functionality of solar cells structure based on CuIn1-xGaxSe2 is investigated. This type of solar cell consists of different layers, namely ZnO (TCO layer), Cd_S (Buffer layer), CIGS (Absorbent layer), and MO (Substrate layer). Two layers, Cd_S and CIGS, form a PN Junction. CIGS Thin Film Solar Cell is simulated using SILVACO software. The absorbent layer doping was originally changed. Later doping was kept constant and P-type layer of InAsP was added. Their effect on cell function was observed and examined. It was observed that after doping some parameters of the solar cell have improved whilst some others had decreased. It was also concluded that examined increase of decrease in the amount of dopant would reduce our efficiencies of solar cell. Added the InAsP layer leads to increased open circuit voltage, short circuit current and the solar cell power, consequently gives the yields about 33.2%, which is acceptable efficiency.
Keywords:
Authors
Hashem Firoozi
Department of Electrical and Computer Engineering, Faculty of Agriculture, Fasa Branch, Technical and Vocational University (TVU), Fars, Iran
Mohsen Imanieh
Department of Electrical Engineering, Fasa Branch, Islamic Azad University, Fasa, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :