Thin-Walled Tube Bending Process Simulation using ABAQUS Software and an Investigative Comparison between Simulation,Experimental and Stress Analysis Results
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 3,202
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME11_406
تاریخ نمایه سازی: 3 مرداد 1389
Abstract:
In this paper, the bending process of thin-walled tubes by rotary draw method is initially simulated in ABAQUS software.Then the necessary experiments are carried out, and the simulation results associated to the quality of the product in terms of changes in the wall thickness and ovality of the cross section as well as the required moment for tube bending are compared with the empirical findings. The comparison demonstrates the high accuracy of the simulation results. The required moment is also calculated by the stress analysis method, and an integrated discussion is made over the errors of simulation, experiment and analytical stress analysis.
Keywords:
Rotary draw bending- Stress analysis-ABAQUS
Authors
M Salem
Master Student of Mechanical Engineering,Isfahan University of Technology
M Farzin
Associate Professor, Department of Mechanical Engineering, Isfahan University of Technology
M Kadkhodaei۳
Assistant Professor, Department of Mechanical Engineering, Isfahan University of Technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :