ISI Papers
- "Creep Degradation of Thermally Exposed IN738C Superalloy", ASME International, (2009), Vol 131, No 3:
- "Creep Life Prediction of Thermally Exposed Rene 80 Superalloy", Springer Science and Business Media LLC, (2010), Vol 19, No 7: 1065-1070
- "Oxidation and Melting Characterizations of AZ91D Granules during <i>In Situ</i> Melting", Trans Tech Publications, Ltd., (2011), Vol 311-313, No : 631-634
- "Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys", Elsevier BV, (2011), Vol 21, No 7: 1455-1464
- "The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al–Si alloys", Springer Science and Business Media LLC, (2011), Vol 109, No 1: 105-111
- "Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys", Elsevier BV, (2012), Vol 64, No : 184-197
- "Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys", Elsevier BV, (2012), Vol 33, No : 88-97
- "In-situ thermal analysis and macroscopical characterization of Mg–xCa and Mg–0.5Ca–xZn alloy systems", Elsevier BV, (2012), Vol 527, No : 180-189
- "<I>In-Situ</I> Melting Assessment of AZ91D Granules by Thermal Analysis", American Scientific Publishers, (2012), Vol 14, No 1: 295-298
- "Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting", AIP, (2012), Vol , No :
- "Effect of Machining Parameters on Cutting Force when Turning Untreated and Sb-Treated Al-11%Si-1.8%Cu Alloys Using PVD Coated Tools", Trans Tech Publications, Ltd., (2012), Vol 234, No : 74-77
- "Characterization of AZ91D Granules Covered with a Flux during In-Situ Melting", Wiley, (2012), Vol 29, No 4: 263-272
- "Thermal characteristics and corrosion behaviour of Mg–xZn alloys for biomedical applications", Springer Science and Business Media LLC, (2013), Vol 36, No 6: 1103-1113
- "The Influence of Bismuth, Antimony, and Strontium on Microstructure, Thermal, and Machinability of Aluminum-Silicon Alloy", Informa UK Limited, (2013), Vol 28, No 11: 1184-1190
- "Refinement of Mg2Si reinforcement in a commercial Al–20%Mg2Si in-situ composite with bismuth, antimony and strontium", Elsevier BV, (2013), Vol 86, No : 97-107
- "In situ melting and solidification assessment of AZ91D granules by computer-aided thermal analysis during investment casting process", Elsevier BV, (2013), Vol 50, No : 181-190
- "Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer", Elsevier BV, (2013), Vol 23, No 5: 1322-1333
- "Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis", Elsevier BV, (2013), Vol 559, No : 59-68
- "Effects of Zn and Ca Additions on the Solidification Behavior and Microstructure Analysis of Mg and Mg–6Zn Alloys", American Scientific Publishers, (2013), Vol 19, No 12: 3508-3511
- "Effects of Cutting Condition on Surface Roughness when Turning Untreated and Sb-Treated Al-11%Si Alloys Using PVD Coated Tools", Trans Tech Publications, Ltd., (2013), Vol 315, No : 413-417
- "Effect of Secondary Phase on the Corrosion Behavior of Mg–Ca and Mg–Zn Binary Alloys", American Scientific Publishers, (2013), Vol 19, No 9: 2553-2557
- "Effect of Cooling Rate and Silicon Refiner/Modifier on Solidification Pathways of Al-11Si-2Cu-0.4Fe Alloy", Informa UK Limited, (2013), Vol , No : 130122112552006
- "Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy", Springer Science and Business Media LLC, (2013), Vol 114, No 2: 705-717
- "Combined effect of bismuth content and cooling rate on microstructure and mechanical properties of Al–8·5Si–0·4Mg–0·3Fe alloy", Informa UK Limited, (2013), Vol 52, No 2: 208-216
- "The sequence of intermetallic formation and solidification pathway of an Al–13Mg–7Si–2Cu in-situ composite", Elsevier BV, (2014), Vol 98, No : 119-129
- "Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of a Mg/HA/TiO2/MgO nanocomposite", Elsevier BV, (2014), Vol 40, No 10: 16743-16759
- "The Mechanical Properties and Corrosion Behavior of Quaternary Mg-6Zn-0.8Mn-xCa Alloys", Springer Science and Business Media LLC, (2014), Vol 24, No 2: 598-608
- "Structure-Property Relationship of Cu-Al-Ni-Fe Shape Memory Alloys in Different Quenching Media", Springer Science and Business Media LLC, (2013), Vol 23, No 1: 255-261
- "Role of bismuth on solidification, microstructure and mechanical properties of a near eutectic Al-Si alloys", Springer Science and Business Media LLC, (2014), Vol 20, No 5: 929-938
- "Refinement of Mg<sub>2</sub>Si Particulate Reinforced Al-20%Mg<sub>2</sub>Si <i>In Situ</i> Composite with Addition of Antimony", Trans Tech Publications, Ltd., (2014), Vol 663, No : 271-275
- "On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth", Springer Science and Business Media LLC, (2014), Vol 45, No 3: 1085-1088
- "Influence of Silver nanoparticles addition on the phase transformation, mechanical properties and corrosion behaviour of Cu–Al–Ni shape memory alloys", Elsevier BV, (2014), Vol 612, No : 471-478
- "Evaluations of antimony and strontium interaction in an Al–Si–Cu–Zn die cast alloy", Elsevier BV, (2014), Vol 584, No : 72-78
- "Evaluation of the Effect of Bismuth on Mg<sub>2</sub>Si Particulate Reinforced in Al-20%Mg<sub>2</sub>Si <i>In Situ</i> Composite", Trans Tech Publications, Ltd., (2013), Vol 845, No : 22-26
- "Effect of Elements Cerium and Lanthanum on Eutectic Solidification of Al-Si-Cu near Eutectic Cast Alloy", Trans Tech Publications, Ltd., (2013), Vol 845, No : 118-122
- "Effect of bonding parameters on microstructure development during TGTLP bonding of Al7075 alloy", Informa UK Limited, (2014), Vol 94, No 11: 1166-1176
- "Authors’ Reply to Discussion of ‘‘On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth’’", Springer Science and Business Media LLC, (2014), Vol 45, No 12: 5306-5307
- "A new approach to assess the effects of Sr and Bi interaction in ADC12 Al–Si die casting alloy", Elsevier BV, (2014), Vol 575, No : 179-187
- "Effect of bismuth and strontium interaction on the microstructure development, mechanical properties and fractography of a secondary Al–Si–Cu–Fe–Zn alloy", Elsevier BV, (2015), Vol 621, No : 28-38
- "Dry Sliding Wear Behavior of A356-ZrO<sub>2</sub> Metal Matrix Composite", Trans Tech Publications, Ltd., (2015), Vol 1125, No : 116-120
- "Alteration by Cerium Element on Primary and Eutectic Mg<sub>2</sub>Si Phases in Al-20%Mg<sub>2</sub>Si <i>In Situ</i> Composite", Trans Tech Publications, Ltd., (2015), Vol 1125, No : 23-27
- "Wettability Enhancement of SiCp in Cast A356/SiCp Composite Using Semisolid Process", Informa UK Limited, (2015), Vol 30, No 12: 1442-1449
- "Microstructure development, phase reaction characteristics and mechanical properties of a commercial Al–20%Mg2Si–xCe in situ composite solidified at a slow cooling rate", Elsevier BV, (2015), Vol 650, No : 821-834
- "Investigating the Machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert", Elsevier BV, (2015), Vol 62, No : 170-178
- "Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach", Springer Science and Business Media LLC, (2014), Vol 77, No 5-8: 831-838
- "Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material", Elsevier BV, (2015), Vol 85, No : 431-437
- "Fuzzy logic based model for predicting surface roughness of machined Al–Si–Cu–Fe die casting alloy using different additives-turning", Elsevier BV, (2015), Vol 61, No : 150-161
- "Fatigue properties of temperature gradient transient liquid phase diffusion bonded Al7075-T6 alloy", Elsevier BV, (2015), Vol 25, No 4: 1073-1079
- "Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis", Springer Science and Business Media LLC, (2015), Vol 119, No 3: 1593-1601
- "Evaluation of cutting force and surface roughness in the dry turning of Al–Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach", Elsevier BV, (2015), Vol 76, No : 170-182
- "Effects of Quenching Media on Phase Transformation Characteristics and Hardness of Cu-Al-Ni-Co Shape Memory Alloys", Springer Science and Business Media LLC, (2015), Vol 24, No 4: 1522-1530
- "Effect of Cooling Rate on the Corrosion Behaviour of Zn-Al and Zn-Al-Mg Alloy", Trans Tech Publications, Ltd., (2015), Vol 819, No : 71-75
- "Combined effect of strontium modifier and antimony refiner on texture and growth mode of eutectic phase in an Al-11Si-2Cu-0.8Zn-0.6Fe cast alloy", Informa UK Limited, (2015), Vol 95, No 12: 587-593
- "Flake-fibrous transition of silicon in near-eutectic Al-11.7Si-1.8Cu-0.8Zn-0.6Fe-0.3Mg alloy treated with combined effect of bismuth and strontium", Elsevier BV, (2016), Vol 656, No : 944-956
- "Microstructure, mechanical properties and corrosion behavior of Al–Si–Cu–Zn–X (X=Bi, Sb, Sr) die cast alloy", Elsevier BV, (2016), Vol 26, No 1: 28-38
- "Effect of Primary and Eutectic Mg2Si Crystal Modifications on the Mechanical Properties and Sliding Wear Behaviour of an Al–20Mg2Si–2Cu–xBi Composite", Elsevier BV, (2016), Vol 32, No 11: 1083-1097
- "Effect of modifier elements on machinability of Al-20%Mg<sub>2</sub>Si metal matrix composite during dry turning", Informa UK Limited, (2016), Vol 20, No 3: 460-474
- "Microstructure development, phase reaction characteristics and properties of quaternary Zn-0.5Al-0.5Mg-xBi hot dipped coating alloy under slow and fast cooling rates", Elsevier BV, (2017), Vol 315, No : 112-122
- "Characterization of Phase Formation in Al-20%Mg<sub>2</sub>Si-2%Cu Metal Matrix Composite", Trans Tech Publications, Ltd., (2017), Vol 264, No : 186-189
- "Thermal Characteristics, Mechanical Properties, In Vitro Degradation and Cytotoxicity of Novel Biodegradable Zn–Al–Mg and Zn–Al–Mg–xBi Alloys", Springer Science and Business Media LLC, (2017), Vol 30, No 3: 201-211
- "Machinability characteristics, thermal and mechanical properties of Al-Mg 2 Si in-situ composite with bismuth", Elsevier BV, (2017), Vol 110, No : 263-274
- "Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities", Elsevier BV, (2017), Vol 73, No : 215-219
- "Effect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding Wear Behavior of Compocasted A356/20SiCp Composites", Informa UK Limited, (2017), Vol 61, No 1: 88-99
- "Effect of Superheating Melt Treatment on Mg 2 Si Particulate Reinforced in Al-Mg 2 Si-Cu In situ Composite", Elsevier BV, (2017), Vol 184, No : 595-603
- "Computer-aided cooling curve thermal analysis and microstructural evolution of Mg–5Zn–xY cast alloys", Springer Science and Business Media LLC, (2017), Vol 130, No 3: 1429-1437
- "Role of Sr on microstructure, mechanical properties, wear and corrosion behaviour of an Al–Mg2Si–Cu in-situ composite", Elsevier BV, (2020), Vol 239, No : 121954
- "Microstructure, phase evolution and corrosion behaviour of the Zn–Al–Mg–Sb alloy coating on steel", Informa UK Limited, (2019), Vol 36, No 3: 353-366
- "A novel method to enhance the performance of an ex-situ Al/Si-YSZ metal matrix composite", Elsevier BV, (2020), Vol 823, No : 153673
- "Cooling curve thermal analysis of Al–Mg2Si–Cu–xSr composite", Springer Science and Business Media LLC, (2019), Vol 141, No 3: 1109-1122
- "Effect of heat treatment parameters on microstructure, defects, and properties of Al-16Si-6Cu automotive shift fork: quantitative evaluation perspective", Informa UK Limited, (2022), Vol 35, No 1-3: 60-72
- "On the effect of praseodymium on solidification characteristics, microstructure, and mechanical properties of commercial ADC12 alloy", Springer Science and Business Media LLC, (2023), Vol , No :
- "Solidification Characteristics of Ex situ Particulate-Reinforced Aluminum Matrix Composites", Springer Science and Business Media LLC, (2023), Vol , No :
Conference Papers
- تاثیر سرعت همزدن در حالت نیمه جامد بر روی خواص کامپوزیت A۳۵۶-۱۵%SiC ارائه شده در 10th International Conference on Materials Science & Metallurgical Engineering (iMat2021) (1400)
- Microstructure Evaluation and Solidification Characteristics of Al-Mg2Si-SiC/Al2O3/YSZ Hybrid Composites ارائه شده در 9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020) (1399)
- طراحی وساخت ترموول(غلاف ترموکوپل) ارائه شده در 27th Annual Conference of Mechanical Engineering (1398)
- ساخت و ارزیابی کامپوزیت هایبریدی C 4 xB-Si 2 Mg 22 -A1 ارائه شده در 8th International Conferenece and Exhibition on Materials Engineering and Metallurg (1398)
- تاثیر عملیات حرارتی انتخابی بر مشخصه های سیلیسیم اولیه در آلیاژ دایکست Al-۱۶Si-۶Cu ارائه شده در 8th International Conferenece and Exhibition on Materials Engineering and Metallurg (1398)
- تاثیر دمای پیرسازی بر روی خواص فولاد ابزار k340 ارائه شده در Fourth National Conference on Materials Engineering, Chemical Engineering and Industrial Safety (1397)
- اثر عملیات حرارتی بر روی ریزساختار خواص مکانیکی آلیاژ دایکست Al-16Si-6Cu مورد استفاده در صنایع خودرو ارائه شده در 7th International Conference on Materials and Metallurgical Engineering (iMat 2018) (1397)
- ایجاد پوشش کامپوزیتی نیکل- اکسید آهن به روش رسوبدهی همزمان الکتریکی بررسی خواص پوشش ایجاد شده ارائه شده در 7th International Conference on Materials and Metallurgical Engineering (iMat 2018) (1397)
- Characterizing Solidification of Zn-Mg-Al Alloy with Addition of 0.1%Sb by Non-Equilibrium Thermal Analysis ارائه شده در The 6th International Conference on Exhibitiion on Metallurgy and Materials Engineering (1396)
- Interaction between Strontium and Phosphorus during Solidification of Hypereutectic A390 Cast Alloy ارائه شده در 10th joint meeting of the 5th International Conference on Materials and Metallurgical Engineering Society and Iranian Foundry Society (1395)
- Study the Effect of Strontium Addition on Microstructure, Impact Toughnessand Corrosion Behaviour of Al-Mg2Si In-situ Composite ارائه شده در 4th Iran Aluminum International Conference IIAC2016 (1395)
- Feasibility of Joining Al-20%Mg2Si In-Situ Composite By TIG Welding ارائه شده در Iran International Aluminum Conference (1391)
- تاثیرHIP بر افزایش خواص مکانیکی پره سوپرآلیاژ پایه نیکلی IN۷۳۸ ارائه شده در 14th Annual Conference of Mechanical Engineering (1385)
- پیش بینی تشکیل فازهای TCP در سوپرآلیاژهای پایه نیکل ارائه شده در 10th Congress of the Iranian Metallurgical Society (1385)
- بررسی ریزساختاری و خواص مکانیکی سوپر آلیاژ IN738 پس از حرارت دهی در زمانهای طولانی ارائه شده در 9th Congress of the Iranian Metallurgical Society (1384)
Journal Papers
- تاثیر همزمان فوق گدازی مذاب و زمان نگهداری بر تغییرات ساختاری، مشخصه های انجمادی و سختی کامپوزیت Al-۲۰Mg۲Si-۲Cu منتشر شده در Founding Research Journal (1400)
- تاثیر همزمان بیسموت، شرایط سرد شدن و پیرسازی مصنوعی بر روی کارایی آلیاژ ریختگی Al-۸Si-۰.۳Mg منتشر شده در Founding Research Journal (1397)
- استفاده از آنالیز حرارتی و کوئنچ منقطع به منظور بررسی اثر متقابل بیسموت و استرنسیم بر مشخصه های تخلخل منتشر شده در Founding Research Journal (1396)
سوابق شغلی و تخصصی
- سابقه تدریس در عضو هیات علمی دانشگاه (12-تاکنون)