Qualification of Propeller by Experimental and Analytical Methods
Publish place: International Journal of Advanced Design and Manufacturing Technology، Vol: 12، Issue: 1
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 275
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-12-1_004
تاریخ نمایه سازی: 27 فروردین 1399
Abstract:
The paper focuses on static and dynamic analysis of propeller blade made of Aluminium-24345 material. The solid model of propeller blade and propeller are developed in CATIA V5 R20. By using this model, propeller blade was manufactured using 3-Axis CNC milling machine by adopting MASTERCAM software. Qualification tests were carried out on the propeller blade of an underwater vehicle for their strength and vibration. Impact Hammer Method is employed to measure the vibration-damping properties of Propeller blade. Computational Fluid Dynamics (CFD) analysis is carried out to analyze the contours of static pressure on the 5-Blade propeller and the forces, moments acting on the propeller. Finite element analysis (FEA) of the blade was carried in ANSYS 15.0. Static, modal, harmonic analysis was carried out on analysis software for the modeled propeller blade and Factor of Safety was determined to qualify the propeller.Deformation of the propeller blade is measured using Coordinate Measuring Machine (CMM).
Keywords:
Authors
K. Siva Prasad
Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, India
S. Murthy Bellala
Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, India
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :