سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

The Influence of Geometric Characteristics on The Performance of Steel Shear Wall

Publish Year: 1399
Type: Journal paper
Language: English
View: 427

This Paper With 12 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_ARCE-2-1_004

Index date: 18 April 2020

The Influence of Geometric Characteristics on The Performance of Steel Shear Wall abstract

The aim of this study is to investigate the mutual effect of geometrical properties of steel shear walls on their performance. This study was numerically performed using ABAQUS finite element software for simulation. In this study the effect of the diameter of the openings to the steel shear wall height ratio and the hardeners angles have been studied nonlinearly. The results show that as a result of the opening of the sheet, the shear resistance decreases proportionally to the decrease in its cross-sectional plane, but on the other hand, it increases the steel plate shear wall ductility and the 8% diameter is the largest diameter of opening which has a good effect on shear wall performance and the presence of reinforcing elements such as hardener increases the hardness of the steel shear wall and in this case it shows that using cross hardeners has the most effect in absorbing the energy of steel shear wall.

The Influence of Geometric Characteristics on The Performance of Steel Shear Wall Keywords:

The Influence of Geometric Characteristics on The Performance of Steel Shear Wall authors

Peyman Katal Mohseni

Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Iran

Amin Zahedi- Khameneh

Department of Civil Engineering, Malard Branch, Islamic Azad University, Malard, Iran

Zahra Khodaverdlou

Iran University of Science and Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
- Takahashi, Y., Takemoto, Y., Takeda, T., & Takagi, M., ...
- Omori, S., Toyama. K., Cho T., and Takahashi, T., ...
- Mutoh, K., Miyashita, O., Osada, M., Kanayama, H., 1968, ...
- Hitaka, T., and Matsui, Ch., 2003, Experimental study on ...
- Roberts, T. M., and Sabouri-Ghomi, S., 1992, Hysteretic characteristics ...
- Hosseinzadeh, S. A. A., and Tehranizadeh, M., 2012, Introduction ...
- Nateghi, F., Alavi, E., 2009, Non-linear behavior and shear ...
steel plate shear walls, International Journal of Engineering, Trans B, ...
- Alavi, E., and Nateghi, F., 2010, Nonlinear behavior of ...
-Alavi, E., and Nateghi, F., 2013, Experimental study on diagonally ...
- Bhowmick, A. K., Grondin, G. Y., and Driver, R. ...
- Egorova, N., Eatherton, M. R., and Maurya, A., 2014, ...
-farzampour, A., and Jeffrey, A., 2015, Behavior prediction of corrugated ...
-Abadi, A. A. R., and Zandi, Y., 2016,.Examining the effect ...
-Sabouri- Ghomi, S. and Mamazizi, S., 2015, Experimental investigation on ...
- Kiani, J., and Tsavdaridis, K. D., 2018, The Effect ...
- Khaloo, A., Foroutani, M., and Ghamari, A., 2019, Influence ...
- Systèmes, D., 2014, ABAQUS 6.14 Analysis User s Guide, ...
- ASCE/SEI 7-10, 2019, Minimum design loads for buildings and ...
Alexander Bell Drive, Reston, Virginia 20191: American Society of Civil ...
نمایش کامل مراجع