Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 267
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-6-3_002
تاریخ نمایه سازی: 11 تیر 1399
Abstract:
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites including matrix cracking, fiber damage and delamination by employing Hashin’s criterion and cohesive zone modeling. The obtained results for 0, 0.5, 1, 2 and 4% CNTs demonstrate that by including CNTs in composite plates, damage could be reduced. However, adding further CNTs causes sudden reduction of impact tolerance capability of the composite plates, particularly, damage due to delamination.
Keywords:
Authors
Farzad Pashmforoush
Department of Mechanical Engineering, Faculty of Engineering, University of Maragheh, Maragheh, Iran.
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :