Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites
Publish place: Mechanics of Advanced Composite Structures، Vol: 7، Issue: 1
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 281
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-7-1_007
تاریخ نمایه سازی: 14 تیر 1399
Abstract:
In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstructures and chemical elements. Furthermore, mechanical and wear behavior of as cast Al7075 alloy and Al7075 -5 and 10 wt. % of nano TiO2 composites were examined. Mechanical properties like hardness, UTS, yield quality, and ductility were assessed pursuant to ASTM measures. Pin on disc contraption was applied in order to lead the dry sliding wear tests. The analyses were led by differing loads and sliding speeds for a sliding distance of 3000 m. From the examination, it was discovered that the hardness, extreme strength and yield quality of composites were expanded because of nano TiO2 particles in the Al7075 amalgam grid. In nano TiO2 fortified composites the rate extension was diminished. Moreover, there was an expansion in the volumetric wear misfortune concerning the load, speed and sliding distance for all the readied materials. In order to inspect the fractography and dissimilar wear mechanisms for various test conditions of different compositions, tensile fractured surfaces and the worn surface morphology were analyzed by scanning electron microscope.
Keywords:
Authors
Madeva Nagaral
Aircraft Research and Design Centre, Hindustan Aeronautics Limited, Bangalore, Karnataka, India-۵۶۰۰۳۷
V Auradi
Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur, Karnataka, India-۵۷۲۱۰۳
S A Kori
Department of Mechanical Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka, India-۵۸۷۱۰۲
Veena Shivaprasad
Department of Physics, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India-۵۶۲۱۵۷
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :