The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications

Publish Year: 1398
نوع سند: مقاله ژورنالی
زبان: English
View: 267

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_MACS-6-2_009

تاریخ نمایه سازی: 14 تیر 1399

Abstract:

In the present study, the effect of banana peel and bagasse particle additives on the friction and wear behavior of multi-ingredient friction material nanocomposites have been investigated. In order to develop optimized properties of friction nanocomposite, the type and content of natural additives were changed beside the constant amount of other constituents such as alumina nanoparticle and other functional ingredients. The microstructural investigation and wear test were performed. The results showed as the natural additive content increases, the density of nanocomposite, and the hardness decrease. The highest hardness and friction values and the lowest specific wear rate would be achieved for a composite sample with 5 wt. % of baggase additive.

Authors

Mostafa Amirjan

Metallurgy Division, Department of Chemical and Materials Engineering, Niroo Research Institute (NRI), ۱۴۶۸۶۱۷۱۵۱, Tehran, Iran

Hassan Sakiani

Faculty of Mining and Metallurgy, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Aranganathan N, Bijwe J. Development of copper-free eco-friendly brake-friction material ...
  • Rongping Y, Martynková SG, Yafei L. Performance and evaluation of ...
  • Aigbodion V, Akadike U, Hassan S, Asuke F, Agunsoye J. ...
  • Ganguly A, George R. Asbestos free friction composition for brake ...
  • Garg BD, Cadle SH, Mulawa PA, Groblicki PJ, Laroo C, ...
  • Cho KH, Cho MH, Kim SJ, Jang H. Tribological Properties ...
  • Roubicek V, Raclavska H, Juchelkova D, Filip P. Wear and ...
  • Kukutschová J, Roubíček V, Malachová K, Pavlíčková Z, Holuša R, ...
  • Kukutschová J, Roubíček V, Mašláň M, Jančík D, Slovák V, ...
  • Ghazali C, Kamarudin H, Shamsul JB, Abdullah MMA, Rafiza AR. ...
  • Ghazali C, Kamarudin H, Jamaludin SB, Abdullah MMA. Comparative Study ...
  • Kim YC, Cho MH, Kim SJ, Jang H. The effect ...
  • Ibhadode AOA, Dagwa IM. Development of asbestos-free friction lining material ...
  • Ikpambese KK, Gundu DT, Tuleun LT. Evaluation of palm kernel ...
  • Fu Z, Suo B, Yun R, Lu Y, Wang H, ...
  • American Society for Testing and Materials. Committee B09 on Metal ...
  • Japanese Industrial Standard. Test Procedure of Porosity for Brake lining ...
  • American Society for Testing and Materials. Standard Test Method for ...
  • Iran National Standard. Brake pad properties and its tests. ISIRI ...
  • Österle W, Dörfel I, Prietzel C, Rooch H, Cristol-Bulthé AL, ...
  • De Gisi S, Lofrano G, Grassi M, Notarnicola M. Characteristics ...
  • Sangnark A, Noomhorm A. Effect of particle sizes on functional ...
  • Rasul M, Rudolph V, Carsky M. Physical properties of bagasse. ...
  • Ikpambese K, Gundu D, Tuleun L. Evaluation of palm kernel ...
  • Algan İKA. The Effect of Metal Fibers and Borax Powders ...
  • نمایش کامل مراجع