Liquefaction Hazard assessment using Horizontal-to-Vertical Spectral Ratio of Microtremor
Publish place: Structural Engineering & Geotechnic، Vol: 8، Issue: 2
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 596
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_QSEJ-8-2_004
تاریخ نمایه سازی: 11 مرداد 1399
Abstract:
In this paper, the spectral ratio of mmicrotremor, HSVR, is presented for estimating the liquefaction potential of layered soil in the coastal area of the Persian Gulf, which consists of a hard sandstone layer situated between two saturated sandy layers. The surface layer is thin, with a thickness between 2 and 5 meters. The purpose of this paper is to identify the relation between the liquefaction potential, the natural frequency and the amplification factor values using microtremors. Liquefaction assessment was done at 27 stations using the HVSR approach provided by Nakamura [1]. HVSR analysis was carried out using the Geopsy software. According to the results of the analysis, the predominant frequency values range from about 0.8 Hz to 2.4 Hz and the amplification factor values range from 1.1 to 2.8. Based on these parameters, the vulnerability index Kg is determined, which can be used as a parameter in calculating the liquefaction potential of an area. The results show that the vulnerability index is related to the sedimentary depth as well as the frequency and amplification factor. Furthermore, the calculated results confirm that the southern area of Bushehr City, which is larger than other areas, has a high liquefaction potential. Furthermore, it is possible to determine the limit of Kg to estimate the liquefaction hazard. Comparing the results confirms that in Bushehr, a soil layer is liquefiable if its related Kg value is over 1.7. This value may change with the conditions of the layer and the soil specification.
Keywords:
Authors
Mehdi Mokhberi
Department of civil engineering, Estahban Branch, Islamic azad University, Shiraz , Iran
Sadegh Yazdanpanah Fard
bDepartment of civil engineering, Estahban Branch, Islamic azad University, Estahban, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :