An Experimental Investigation of the Effects of Fiber Laser Percussion Drilling: Influence of Process Parameters
Publish place: International Journal of Advanced Design and Manufacturing Technology، Vol: 9، Issue: 4
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 221
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-9-4_002
تاریخ نمایه سازی: 18 اردیبهشت 1400
Abstract:
This study is focused on investigating the parameters of laser percussion drilling process of nickel-base super alloy Inconel ۷۱۸ with thickness of ۱ mm. Fiber laser with the power of ۵۰۰ watts was used as the laser source. Laser pulse frequency, duty cycle, laser power, focal point position, were assumed as the laser drilling process variables. The hole geometry features, i.e. entrance hole diameter, circularity of entrance hole, and hole taper were measured. The results indicated that pulse frequency of laser has a direct influence on the entrance hole diameter. Increasing the duty cycle leads to increases in hole taper. By increasing the laser power, entrance diameter and hole taper increases.
Keywords:
Authors
Mahmoud Moradi
Department of Mechanical Engineering, Faculty of Engineering, Malayer University, Malayer, Iran
Alireza Mohazab Pak
Department of Mechanical Engineering, Faculty of Engineering, Malayer University, Malayer, Iran
Ali Khorram
Department of Mechanical Engineering, K.N.Toosi University of Technology,P.O. Box ۱۹۳۹۵-۱۹۹۹, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :