Physical modelling of caving propagation process and damage profile ahead of the cave-back
Publish place: Journal of Mining and Environment، Vol: 11، Issue: 4
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 242
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-11-4_009
تاریخ نمایه سازی: 21 اردیبهشت 1400
Abstract:
The cavability assessment of rock mass cavability and indicating the damage profile ahead of a cave-back is of great importance in the evaluation of a caving mine operation, which can influence all aspects of the mine operation. Due to the lack of access to the caved zones, our current knowledge about the damage profile in caved zones is very limited. Among the different approaches available, physical modelling can provide a useful tool for assessment of the cave propagation and understanding the cave-back mechanism. Despite the general belief of the continuous damage profile ahead of a cave, the recent studies have shown a different mechanism of banding fracture. In order to investigate the caving mechanism ahead of a cave, a base friction apparatus is designed in this work. The base friction powder is used as the modelling material for physical testing, where its strength properties is significantly dependent on its unit weight. The effects of the material’s unit weight and the undercutting process on the cavability and cave-back height are studied. The experimental results undertaken in this research work clearly confirm the banding fracture mechanism in the caved zone, rather than continuous yielding. The effect of the undercutting sequence on the cave-back height is investigated through three different scenarios of symmetric undercutting with a gradual increase in span, symmetric undercutting with a sudden increase in span, and asymmetric undercutting. The results obtained show that the ground deformation is significantly dependent on the undercutting sequence, where choosing a greater undercutting span results in a faster cave propagation and smaller accessible undercut spans.
Keywords:
Authors
V. Heydarnoori
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
M. H. Khosravi
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
M. Bahaaddini
Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :