Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 248
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-34-9_008
تاریخ نمایه سازی: 12 مرداد 1400
Abstract:
This paper proposes the optimal design process of an Interior permanent magnet synchronous generator (IPMSG) for wind power systems using the finite-element analysis (FEA). A multi-objective optimization design of PM generator based on Taguchi method is proposed. This paper takes the influence of the pole arc angle, magnet inset, magnet thickness, magnet width, stator tooth width and slot depth into consideration as a design parameters. The main characteristics of generator efficiency, torque ripple and output power are taken as optimization objectives. The orthogonal matrix is established according to the number of selected parameters and the level factor of each parameter and FEM is used to solve the experimental matrix. As a result, an improved generator was designed and selected, which had higher maximum output power and efficiency and lower torque ripple. Finally, a prototype IPMSG was manufactured based on analysis results and Taguchi method, and was tested. The experimental tests were conducted to verify the validity of the proposed design process and the effectiveness of the generator and as a result, perfectly cleared the optimization design.
Keywords:
Interior permanent magnet machine , Finite element method , multi-objective optimization design , orthogonal matrix , Taguchi method
Authors
Seyyed Reza Karimpour
Electrical and Electronic Engineering, Shahed university, Tehran, Iran
Mohammad Reza Besmi
Electrical and Electronic Engineering, Shahed university, Tehran, Iran
Seyyed Mehdi Mirimani
Babol Noshirvani University of Technology( BNUT)