Utilizing Modern Experimentation Method to Quantify Jet-Breaker Dimension Effects on Drop Manhole Pool Height
Publish place: Civil Engineering Journal، Vol: 4، Issue: 12
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: Persian
View: 173
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CEJ-4-12_015
تاریخ نمایه سازی: 28 آذر 1400
Abstract:
Drop manholes are commonly employed in sewer and drainage systems to reduce pipes slope. The operation of these structures is dominated by their flow regime. Poor hydraulic performance of them under Regime R۲ was improved with the jet-breaker, which intersects the inlet jet; yet its proper dimensions were needed to be precisely determined. In this paper, effects of jet-breaker length, width, sagitta, and angle on drop manhole pool free-surface height were experimentally studied under ۸۰% filling ratio of the inlet pipe. The modern statistical Design of Experiment (DoE) methodology and dimensional analysis were utilized to design the experiments in accordance with the ۲۴-۱IV fractional factorial design. Consequently, nine specific jet-breakers were built and examined at two different angles, and under various flow rates. The statistical analysis of the results shown that manhole pool height was significantly decreased when jet-breaker length, width, and sagitta were ۱, ۱.۴, and ۰.۷ times the inlet pipe diameter, respectively, and its angle was at ۷۰°. The use of DoE resulted in ۲۱% reduction in experimental runs, cost, and time, while it provided comprehensive data analysis and objective conclusion.Keywords: Drop
Keywords:
Authors
Seyedreza Hasheminejad
Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Mohammad-Javad Khanjani
Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
Gholam-Abbas Barani
Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iran