Optimization of Abrasive Water Jet Cutting Parameter for AISI ۳۱۶L Stainless Steel Sheet
Publish place: Journal of Applied Fluid Mechanics، Vol: 10، Issue: 0
Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 112
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-10-0_003
تاریخ نمایه سازی: 27 دی 1400
Abstract:
Abrasive water jet cutting is a advanced manufacturing process to be used cut various type of material economically. The width of AWJC or kerf width is affected by Abrasive flow rate, cutting speed and stand of distance as well as the work-piece material. In this present work AWJC of stainless steel AISI ۳۱۶L ۲mm thickness has been investigated. Design of experiment was implemented by to applying the full factorial design method. In this work to relate the top kerf width and bottom kerf width and the above process parameters. Mathematical models were developed to evaluate the relationship between the process parameters and the top and bottom kerf width. Also, process parameters effects on the edge quality have been defined. Finally, the numerical optimization has been used to found the optimal AWJC conditions at which the highest edge quality like top and bottom kerf width can be achieved.
Keywords:
Authors
A. Parthiban
Department of Mechanical Engineering, School of Engineering, Vels University Chennai
S. Sathish
Department of Mechanical Engineering, School of Engineering, Vels University Chennai
M. Chandrasekaran
Department of Mechanical Engineering, School of Engineering, Vels University Chennai