Asymmetric Water Entry of Twin Wedges with Different Deadrises, Heel Angles, and Wedge Separations using Finite Element Based Finite Volume Method and VOF
Publish place: Journal of Applied Fluid Mechanics، Vol: 10، Issue: 1
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 155
This Paper With 16 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-10-1_031
تاریخ نمایه سازی: 3 بهمن 1400
Abstract:
Asymmetric water entry of twin wedges is investigated for deadrise angles of ۳۰ and ۵۰ degrees, and heel angles of ۵, ۱۰, ۱۵, and ۲۰ degrees as well as wedge separation ratios of ۱ and ۲. Finite Element based Finite Volume method (FEM-FVM) is used in conjunction with Volume of Fluid (VOF) scheme for the targeted analyses. Free surface evolution and impact forces versus time are determined and comparisons of the maximum force of the wedges against each other are presented for all the considered cases. It is demonstrated that the impact force on the second wedge is always greater than the first one by a minimum of ۶% and maximum of ۱۴۶% which is a very significant increase in the impact force and may cause high accelerations and damage to the structure. It is also observed that the mentioned effects increase with decreasing deadrise angle and increasing heel angle.
Keywords:
Authors
R. Shademani
Department of Marine Technology, Amirkabir University of Technology, Tehran, ۱۴۷۱۷, Iran
P. Ghadimi
Department of Marine Technology, Amirkabir University of Technology, Tehran, ۱۴۷۱۷, Iran