Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System

Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 119

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJE-35-3_016

تاریخ نمایه سازی: 27 بهمن 1400

Abstract:

Air circulation plays a vital role in the comfort of passengers in a bus, being a non-AC bus without any aid from the air conditioning system. The circulation of air is utterly dependent on the design of the bus and the natural flow of air. However, optimize the flow of air inside the bus, a study on the design of the bus is needed. In this regard, experimental work was carried out to achieve uniform airflow by redesigning the coach into an aerodynamic shape. The openings are provided at the  leading edge of the bus to evaluate the best possibility for air to circulate in the bus. Three openings were provided at the leading edge of the bus, the first and second openings were mere openings, and the third opening was fitted with a roof vent providing three different geometric patterns to airflow. The initial boundary conditions were developed by considering that all windows and doors of the bus are closed. The scaling ratio of ۱:۲۰ was considered for modeling the bus. The experiments were conducted in the wind tunnel test rig. It was observed from the experimentation that the velocity of the air was considered to be the most influential parameter for the optimal air circulation. The velocities of  ۲۱.۹۶ m/s and ۲۲.۶۸ m/s were obtained inside bus. The obtained experimental velocities were validated with results obtained by the Computational Fluid Dynamics (CFD). It was observed that a deviation of ۵% for the given velocity of ۲۰ m/s.

Authors

S. J. Niranjana

Department of Mechanical Engineering, School of Engineering and Technology, CHRIST (Deemed to be University), Bengaluru- ۵۶۰۰۷۶, Karnataka, India

S. S. Kubsad

Department of Mechanical Engineering, Atria Institute of Technology, Bengaluru- ۵۶۰۰۲۴, Karnataka, India

S. Manjunatha

Department of Mathematics, School of Engineering and Technology, CHRIST (Deemed to be University), Bengaluru- ۵۶۰۰۷۶, Karnataka, India

Y. Nagaraj

Department of Mechanical Engineering, SJM Institute Technology, Chitradurga-۵۷۷۵۰۲, Karnataka, India

I. Bhavi

BLDEA’s V.P. Dr. P.G. Halakatti College of Engineering and Technology, Vijayapur-۵۸۶۱۰۳, Karnataka, India

B. M. Angadi

BLDEA’s V.P. Dr. P.G. Halakatti College of Engineering and Technology, Vijayapur-۵۸۶۱۰۳, Karnataka, India

A. J. Chamkha

Faculty of Engineering, Kuwait College of Science and Technology, Doha District, ۷th Ring Road, ۳۵۰۰۴, Kuwait

M. B. Vanarotti

Sanjeevan Engineering & Technology Institute, Sanjeevan Knowledge City, Panhala, Kolhapur, Maharastra, India

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :