The obtain optimum production conditions for Glucose Oxidase biosensor using software Qualtek-۴
Publish place: International Journal of Nano Dimension، Vol: 6، Issue: 1
Publish Year: 1394
نوع سند: مقاله ژورنالی
زبان: English
View: 132
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJND-6-1_004
تاریخ نمایه سازی: 24 تیر 1401
Abstract:
The Glucose Oxidase (Gox) electrochemical sensors were used to detect a little amount of glucose. In this paper, the pure platinum plate (length of ۵ cm and a width of ۳ mm), the Ag/AgCl electrode and platinum electrode (diameter of ۱ mm) were applied as a working electrode (W.E), reference electrode and auxiliary electrode sequential. Factors measured, glucose concentration and pH is Phosphate-buffered saline (PBS) that design software QUALTEK-۴ has been tested. The experiments performed tests of the software, with increasing concentration, the current output is increased. Optimal conditions were optioned in neutral pH and maximum glucose concentrations. After confirmation tests in optimum conditions the expected error rate of application lower than ۱۰ %. It shows the true error rate test with high sensitivity and accuracy.
Keywords:
Authors
O. Ramezani Azghandi
Young Researchers Club, Quchan Branch, Islamic Azad University, Quchan, Iran.
A. Farahbakhsh
Department of Chemical Engineering, Quchan Branch, Islamic Azad University, Quchan, Islamic Republic of Iran.