Robust Linear Parameter Varying Fault Reconstruction of Wind Turbine Pitch Actuator using Second-order Sliding Mode Observer
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 181
This Paper With 13 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JECEI-11-1_020
تاریخ نمایه سازی: 7 آبان 1401
Abstract:
kground and Objectives: In this paper, a novel linear parameter varying (LPV) model of a wind turbine is developed based on a benchmark model presented by Aalborg University and KK-electronic a/c. The observability and validity of the model are investigated using real aerodynamic data.Methods: In addition, a robust fault detection and reconstruction method for linear parameter varying systems using second-order sliding mode observer is developed and implemented on the linear parameter varying model. The fault signal is reconstructed using a nonlinear term named equivalent output error injection during sliding motion and a proper transformation. The effect of uncertainties and incorrect measurements are minimized by employing an oriented method that requires solving a nonlinear matrix inequality. During numerical simulations, an actuator fault in the pitch system is considered and the performance of the method in fault reconstruction is investigated.Results: Wind speed range is considered from ۱۴ m/s to ۱۶ and it is regarded as a stochastic input exerting aerodynamic torque. Fast and accurate fault reconstruction happens in ۰.۶ seconds with less than one percent error. The observer performance is not affected by the fault and fault is estimated in ۲.۵ seconds with an error smaller than ۲.۴۸ percent.Conclusion: Results illustrate fast and accurate fault reconstruction and accurate state estimations in the presence of actuator fault.
Keywords:
Wind turbines , Pitch actuator faults , Linear parameter varying model , Sliding mode observer , Fault reconstruction
Authors
M. Mousavi
Department of Mechanical Engineering, Binghamton University, Binghamton ۱۳۹۰۲, USA.
M. Ayati
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran.
M.R. Hairi-Yazdi
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran.
S. Siahpour
Department of Mechanical Engineering, University of Cincinnati, Cincinnati ۴۵۲۲۱, USA.
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :