Experimental Study and Modeling by the Complete Factorial Plan of the Elimination of Textile Dye by Electrocoagulation Using Aluminum from Recycled Cans
Publish place: Chemical Methodologies، Vol: 7، Issue: 3
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 172
This Paper With 17 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CHM-7-3_001
تاریخ نمایه سازی: 11 دی 1401
Abstract:
This study aims to apply the electrocoagulation (EC) process to eliminate a textile dye, in the case of Azucryl red (AR) using aluminum electrodes from recycled cans to obtain a perfect and economic elimination of the dye. The parameters followed in this electrocoagulation study are the initial pH, the distance between the electrodes, the intensity of the current, the salinity, and the initial concentration of the dye. We tested the effects of two types of electrodes: Aluminum in cans (recycled) and non-recycled aluminum. The results obtained for recycled aluminum electrodes made it possible to get discoloration rates of up to ۹۹,۷۶%, for an initial pH equal to ۸ in a distance of ۱ cm, an electrolysis time corresponding to ۳۵ minutes, an imposed current of ۰,۲۵ A, a quantity of NaCl of ۱ g/L, and ۹۴,۱۶% for non-recycled aluminum at t = ۶۰ min. Modelization by the plan of experiments was carried out, and the models obtained by the complete factorial plan represent the experimental results well. According to the costs of treatment by electrocoagulation, we can consider that for intensity of ۰,۲۵ A (optimal intensity), the cost of treatment is ۳,۵۲.۱۰-۳ DZD (۲,۴.۱۰-۵ ) /L of water treated for electrodes made of non-recycled aluminum, and ۶,۶۳.۱۰-۴ DZD (۴,۴.۱۰-۶ ) /L of treated water for electrodes in cans.
Keywords:
Electrocoagulation , recycled aluminum Non-recycled aluminum Complete factorial plan
Authors
Kenza Elhadeuf
Département de Génie des Procédés, Faculté de Technologie, Université ۲۰ Aout ۱۹۵۵-Skikda, Algeria
Nabil Bougdah
Département de Génie des Procédés, Faculté de Technologie, Université ۲۰ Aout ۱۹۵۵-Skikda, Algeria
Fouzia Balaska
Laboratoire LIPE, Université Salah Boubnider Constantine ۳ Algeria
Mustapha Chikhi
Laboratoire LIPE, Université Salah Boubnider Constantine ۳ Algeria
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :