Analysis and Optimization of Mixing Performance of the High-Temperature Gas Flow in a Mixing Chamber

Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 223

This Paper With 15 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JAFM-16-3_015

تاریخ نمایه سازی: 19 دی 1401

Abstract:

A high-temperature gas mixing chamber is a type of mechanical device which has been widely used to obtain airflow at a specific high temperature. When a temperature environment test for aviation equipment is performed, the airflow temperature should exceed ۱,۰۰۰ K and change fast. However, the existing mixing devices cannot meet the requirements for mixing speed and uniformity of temperature environment tests. To solve the problem of low mixing speed and uniformity, this paper proposes an innovative gas mixing chamber design. The proposed design allows cold and hot gases to be injected in directions perpendicular to each other, which increases the collision and heat exchange of gases with different temperatures. In this way, a faster mixing process and a more uniform outlet temperature field are obtained. Moreover, a genetic optimization method is used to improve the performance of a mixing chamber. This method considers temperature distribution, the velocity distribution of the outlet airflow, and the mixing speed. Simulation results show that the proposed method can reduce the mixing time from ۴.۴ s to ۲.۳ s, the standard deviation of the outlet temperature distribution from ۲۵.۲ to ۱۴.۷, and the standard deviation of velocity distribution from ۱.۳ to ۰.۳۶. The experimental results show good consistency with the simulation results, indicating that the simulation and optimization results are reliable, and the mixing performance of the cold and hot gas mixing chamber is significantly improved by the proposed method. The proposed method is important for optimizing the design of similar orifice plates and flow mixing structures.

Authors

J. Chu

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

D. Zhu

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

W. Wang

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

B. Li

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

J. Du

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

G. Yang

School of Mechanical Science & Engineering, Huazhong University of Science and Technology, WuHan HuBei ۴۳۰۰۷۴, China

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Asif, M., R. Chaturvedi and A. Dhiman (۲۰۲۱). Heat transfer ...
  • Badenhorst, H. (۲۰۲۰). Optimising graphite composites and plate heat exchangers ...
  • Etesami, G., M. E. Felezi and N. Nariman-Zadeh (۲۰۲۱). Optimal ...
  • Filip, R. and T. Melichar (۲۰۲۱). Numerical Analysis of Heat ...
  • Habibi, F. I., F. Hartono and H. Prayogo (۲۰۱۹). Optimization ...
  • Karana, D. R. and R. R. Sahoo (۲۰۲۱). Heat transfer ...
  • Mishra, M. and P. K. Das (۲۰۰۹). Thermoeconomic design-optimisation of ...
  • Mishra, M., P. K. Das and S. Sarangi (۲۰۰۴), Optimum ...
  • Mishra, M., P. K. Das and S. Sarangi (۲۰۰۹). Second ...
  • Mizeraczyk, J., Z. Zakrzewski, M. Jasinski and M. Lubanski (۲۰۰۰). ...
  • Soheil P., and A. S. Daryan (۲۰۲۱). Critical Temperature Evaluation ...
  • Riley, Z. B., R. A. Perez and G. W. Bartram ...
  • Silva, R. C. C., J. M. P. de Menezes Júnior ...
  • Tang, S. Z., M. J. Li, F. L. Wang and ...
  • Tang, T., L. Gao, B. Li, L. Liao, Y. Xi ...
  • Vázquez, F. V., P. Simell, J. Pennanen and J. Lehtonen ...
  • Wang, W., H. Zhang, Z. Zhao, Q. Zheng and B. ...
  • Xie, C. and D. Wang (۲۰۲۰). Multi-objective cross-sectional shape and ...
  • Yan, Y. Y., H. C. Lio and T. F. Lin ...
  • Yee, T. F., I. E. Grossmann and Z. Kravanja (۱۹۹۰). ...
  • Zhang, Z., J. Ma and X. Cui (۲۰۲۱). Genetic algorithm ...
  • Zhao, K., L. I. Feng, L. U. Fuguo, Z. Tao ...
  • Zhao, T., H. Tian, L. Shi, T. Chen, X. Ma, ...
  • Zhu, M. H., W. A. Xi, P. E. Xitong, S. ...
  • Zou, X. F., Guo, D. W. and Pan, K (۲۰۱۸). ...
  • نمایش کامل مراجع