Investigating the effect of steel slag on the compressive strength and firing shrinkage of brick
Publish place: The 6th International Conference on Structural Engineering
Publish Year: 1401
نوع سند: مقاله کنفرانسی
زبان: English
View: 147
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISSEE06_014
تاریخ نمایه سازی: 16 بهمن 1401
Abstract:
Steel-making slag is one of the waste materials of metal production, which is produced in large quantities,
anniversary. Due to the environmental problems caused by their accumulation, it has been tried to minimize their
risks by using these waste materials in the production of other industries. One of the usages of this valuable waste is
used in the production of concrete, cement, or bricks. In this research, the possibility of adding steel slag in the
preparation of bricks and how it affects its properties has been investigated. The results showed that the addition of
slag is possible in certain content due to the compressive strength of the obtained brick. Also, according to the firing
shrinkage created in bricks, slag can be used to produce bricks. This article also considered the firing temperature
of bricks containing slag. In the end, the optimal firing temperature range and slag amount were determined to
achieve the maximum compressive strength and minimum firing shrinkage
Keywords:
Authors
Seyed Vahid Alavi Nezhad Khalil Abad
Assistant professor, Department of civil engineering. Birjand university of technology, Birjand, Iran
Razieh Khoshhal
Assistant professor, Department of materials engineering. Birjand university of technology, Birjand, Iran