Plasma Nitriding Behavior of DIN ۱.۲۳۴۴ Hot Work Tool Steel
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 92
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-17-4_001
تاریخ نمایه سازی: 24 بهمن 1401
Abstract:
In the present investigation effects of time and temperature on plasma nitriding behavior of DIN ۱.۲۳۴۴ (AISI H۱۳) steel are studied. Pulsed plasma nitriding process with a gas mixture of N۲ = ۲۵% + H۲ = ۷۵% and duty cycle of ۷۰% is applied to cylindrical samples of DIN ۱.۲۳۴۴ hot work tool steel. X-ray diffraction, surface roughness, microhardness and ball on disc wear test are performed and behavior of plasma nitrided samples are compared. Scanning electron microscopy and optical microscopy are used in order to observe the microstructure of samples after nitriding. XRD results showed that the compound layer is dual phase. Hardness near the surface dropped by rising the process temperature and it rose in longer process durations. The comparison of µ results showed frictional properties in longer durations with lower temperatures is approximately the same in higher temperatures with shorter durations.
Keywords:
Authors
S. karimzadeh
Department of Materials Engineering, Faculty of Mechanical Engineering, University of Tabriz,۵۱۶۶۶- ۱۴۷۶۶, Tabriz, Iran
F. Mahboubi
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, P.O Box ۱۵۸۷۵-۴۴۱۳, Tehran, Iran
G. Daviran
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, P.O Box ۱۵۸۷۵-۴۴۱۳, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :