The effect of adding H2 to the Flameless Oxidation (FLOX) of biogas on pollutants emission
Publish place: 2nd Annual International Clean Energy Conference
Publish Year: 1391
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,048
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CLEANENERGY02_094
تاریخ نمایه سازی: 1 آذر 1391
Abstract:
Flameless Oxidation (FLOX) is high temperature air and low amount oxygen combustion. This type of combustion was initially titled as large excess enthalpycombustion; today it is known as Flameless Oxidation, High temperature air oxidation, Low NOx injection, and Colorless combustion. In this process the space which isdesigned to be used for the oxidation of fuel, is more occupied by inert gases than by oxygen, and the oxygencontent in this space is too low. In this article, the nonpremixed FLOX of air and biogas (60% CH4, 40%CO2) has been studied using computational fluid dynamics,and the results have been compared to Colorado's experiments. The governing equations of flow are mass conservation equation, momentum equation, turbulenceequation, and species and energy transfer, while all of them are in cylindrical coordinate. K-ɛ renormalizedgroup (RNG-K-ɛ) equations were used to calculate the expressions of turbulence model. Eddy dissipation concept (EDC) model was used to simulate thecombustion flow, and calculation of species transfer, and discrete ordinates (DO) model was applied to correlate the radiant energy. Control volume methodwas used to solve the governing equations and SIMPLE algorithm was used for the coupling of velocity and pressure field, then the impact of H2 addition oncombustion chamber temperature, temperature gradient, heat stress, and pollutants were surveyed. The excellentaccordance between numerical and experimental results validates the current numerical method and approves its ability for the purpose of modeling of similar situations
Keywords:
Authors
SeyedMahmood Mousavi
M.SC. student of aerospace engineering, Ferdowsi university of Mashhad;
Javad Abolfazli Esfahani
proffessor, Ferdowsi university of Mashhad
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :