Free Vibration Analysis of Elastically Connected Beams with Step
Publish place: Journal of Solid Mechanics، Vol: 15، Issue: 3
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 41
نسخه کامل این Paper ارائه نشده است و در دسترس نمی باشد
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-15-3_001
تاریخ نمایه سازی: 3 مهر 1402
Abstract:
In this study, free vibration of stepped beam which is parallel to a uniform beam with same length and elastically connected to it, is considered. Euler-Bernoulli beam theory has been applied to drive equations of motion, abrupt change in height of beam considered as step and Winkler-type elastic layer model serve as connection between beams. The differential transform method (DTM) is applied to determine dimensionless frequencies and mode shapes. In the case of two uniform parallel beams accuracy of solution is verified by comparing with results reported by other methods. It is assumed all supports have one type and fully clamped and fully hinged supports considered for boundary conditions. The effects of different parameters such as: step location and ratio, connecting layer coefficient and boundary conditions on dimensionless frequencies and mode shapes investigated and discussed. This problem handled for first time in present study and results are completely new.
Keywords:
Authors
H Nayebi
Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran
M.M Najafizadeh
Department of Mechanical Engineering, Arak Branch, Islamic Azad University, Arak, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :