سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Effect of Process Parameters on Corrosion Resistance and Microstructure of Vanadium Conversion Coating on Aluminum 2024 Alloy

Publish Year: 1397
Type: Journal paper
Language: English
View: 143

This Paper With 20 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_ICAC-8-29_006

Index date: 25 November 2023

Effect of Process Parameters on Corrosion Resistance and Microstructure of Vanadium Conversion Coating on Aluminum 2024 Alloy abstract

In this research, a vanadium based conversion coating on the aluminum 2024 alloy was applied. The effects of the most important process parameters such as pH (3, 3.5, 4, 5, 6, 7), immersion time (10, 15, 20, 25, 30 minutes), sodium vanadate concentration (5, 7/5, 10 gr/lit) and solution temperature (15, 25, 35, 45 ° C) on corrosion resistance and the morphology of the conversion coating were evaluated. Obtained results from DC (Direct polarization) and EIS (Electrochemical Impedance Spectroscopy) revealed that coated sample at the salt concentration of 10 gr/lit, pH equal to 4, room temperature and immersion time of 25 minutes had the highest anti-corrosion performance. Corrosion current density and polarization resistance for untreated substrate are 2.28 μA/cm2 and 26 kohm.cm2 respectively. These values for optimized vanadium conversion coating are 0.13 μA/cm2 and 147 kohm.cm2. The results of scanning electron microscope showed the formation of uniform convergence of vanadium conversion coating on the aluminum 2024 alloy. Based on the results of energy dispersive X-ray spectroscopy of coated sample at optimal conditions, vanadium conversion coating contains about 3 wt. % of vanadium.

Effect of Process Parameters on Corrosion Resistance and Microstructure of Vanadium Conversion Coating on Aluminum 2024 Alloy Keywords: