Investigation the Effect of Process Time on Microstructure and Corrosion Behavior of Ceramic Coatings Fabricated by Plasma Electrolytic Oxidation (PEO) on Pure Titanium

Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 68

This Paper With 12 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ICAC-7-24_003

تاریخ نمایه سازی: 5 آذر 1402

Abstract:

In this study, the effect of processing time on microstructure and corrosion behavior of coatings fabricated by plasma electrolytic oxidation (PEO) on pure titanium substrate was investigated. All PEO processes were performed in aluminate based electrolyte and under constant applied voltage (۴۲۰ V) and at three times (۱۸۰, ۲۴۰ and ۳۰۰ s). By studying the surface morphology of coatings, it was found that the coating formed at ۱۸۰ s had the most compact and uniform structure with smallest micropores and the least porosity. The XRD pattern of this coating showed that the coating is composed of rutile, anatase and TiAl۲O۵ phases. Also, studying the corrosion behavior of coatings with potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests in ۳.۵ wt.% NaCl solution proved that the coating formed at ۱۸۰ s exhibited the most noble corrosion potential, the lowest corrosion current density and  the most polarization resistance and so the best corrosion resistance among all samples.

Keywords:

Titanium , Plasma Electrolytic Oxidation (PEO) , Aluminate electrolyte , Rutile , Anatase , Corrosion , کلیدی: تیتانیوم , اکسیداسیون الکترولیتی پلاسمایی (PEO) , حمام پوشش دهی آلومیناتی , روتیل , آناتاز , خوردگی.