Evaluation of the block punch index test for predicting the strength of sandstones
Publish place: Scientific Quarterly Journal of Iranian Association of Engineering geology، Vol: 15، Issue: 1
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: Persian
View: 89
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JIRAEG-15-1_007
تاریخ نمایه سازی: 4 دی 1402
Abstract:
Strength measurement of rock requires testing that must be carried out on test specimens with particular sizes in order to fulfill testing standards or suggested methods. Often, the coring process breaks up the weaker core pieces, and they are too small to be used in either index tests or conventional strength tests such as point load index (Is) and Brazilian tensile strength (BTS). One of the index tests to indirectly determine the rock strength is the block punch index (BPI) test, which requires flat disc specimens without special treatment. This study aimed to evaluate the applicability of the BPI test for predicting the uniaxial compressive strength (UCS), BTS and IS of the sandstones by empirical equations. Also, we have compared the performance of the BPI and IS for predicting the UCS and BTS. It was experimentally shown that BPI is a reliable method for predicting the UCS, BTS and Is of the sandstones under study. Moreover, the results indicate that BPI could be utilized with same importance as Is for predicting the UCS, while predicting the BTS by Is appears to be more reliable than BPI.
Keywords:
Authors
داود فریدونی
Academic staff / Damghan University
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :