Removal of Reactive Dyes from Wastewater using Cyclodextrin Functionalized Polyacrylonitrile Nanofibrous Membranes

Electrospinning of nanofibers with cyclodextrin (CD) is attractive because the produced fibers can potentially increase the efficiency of nanofibrous membranes by facilitating the complex formation with organic compounds and high surface area of the nanofibers. In this work, polyacrylonitrile (PAN) nanofibers functionalized with β– cyclodextrin (βCD) during an electrospinning process were used to treat a reactive dye wastewater stream by dynamic method. It was found that the dye removal efficiency was increased from ۱۵.۵% for PAN to ۲۴% for PAN/βCD nanofiber mats. The low efficiency of PAN/βCD membranes was due to the decrease in the βCD content during the filteration process because of the high solubility of βCD in aqueous solutions. By crosslinking βCD through a polycondensation process, the PAN nanofibrous membranes containing βCD polymer (βCDP) were prepared and used for filtration. Compared with PAN nanofibers, it was found that the dye removal efficiency improved more than two times by using PAN/βCDP nanofibers. In such circumstances, due to the decrease in the water solubility of βCDP, the βCDP content in nanofibers didn’t change during filtration; therefore, the dye removal efficiency of the PAN/βCDP nanofibers was higher than that of the PAN/βCD ones. The XRD results also showed that inclusion complexes between the βCD cavities and dye molecules were formed.

Keywords:

β–cyclodextrin , inclusion complex , nanofibrous membrane , reactive dye , Wastewater