Comparison of Structural Modification and Argon Plasma Treatment of Poly(lactide-co-glycolic acid) Nanofibrous Scaffolds for Cell Culture

Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 60

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ITAST-8-2_004

تاریخ نمایه سازی: 14 بهمن 1402

Abstract:

Since poly(lactide-co-glycolic acid) (PLGA), as a biodegradable material, is a hydrophobic polymer which might lead to the incoherence of optimal growth of cells on the scaffold, the scaffold surface modification can promote the cell growth and proliferation. In this study, two methods including structural modification and plasma treatment were employed to improve the surface properties and epithelial kidney cells (Vero) culture efficiency for the PLGA nanofibrous scaffolds. Moreover, the physical, and chemical properties of the modified scaffolds were characterized. Plasma treatment enhances surface hydrophilicity and structural modification improves physical properties of surface such as fiber diameter, surface porosity and alignment index. It was found that the plasma-treated scaffold is more hydrophilic compared to the structurally-modified and non-treated scaffolds. From the ATR-FTIR spectra of the samples, it was observed that the extent of C=O and C-O groups was increased in the plasma-treated samples in comparison with the other groups. Furthermore, in-vitro studies demonstrated that, despite the greater hydrophilicity of the plasma-treated scaffold, both of modified scaffolds enhanced the cell growth and proliferation of Vero cells. In conclusion, the structurally-modified scaffolds have shown a promising potential to improve the cell proliferation as compared with the plasma-modified scaffolds.

Authors

Fatemeh Zamani

Hazrat-e Masoumeh University

Fatemeh Nadipour

Department of Textile Engineering, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.

Masoud Latifi

Department of Textile Engineering, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.

Ali Akbar Merati

Department of Textile Engineering, Amirkabir University of Technology, ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :