Influence of TiN addition on densification behavior and mechanical properties of ZrB2 ceramics
Publish place: Synthesis and Sintering، Vol: 3، Issue: 1
Publish Year: 1402
Type: Journal paper
Language: English
View: 111
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- I'm the author of the paper
Export:
Document National Code:
JR_SYNSINT-3-1_005
Index date: 8 April 2024
Influence of TiN addition on densification behavior and mechanical properties of ZrB2 ceramics abstract
In the present work, densification behavior and mechanical features (fracture toughness and Vickers hardness) of undoped and TiN-doped ZrB2 ceramic materials, hot-pressed at 1800 °C under 15 MPa for 1 h, were studied. The addition of only 5 wt% TiN into ZrB2 has resulted in an increase in its relative density from 83% to 90%. Removal of oxide contaminations like B2O3 via chemical reactions with TiN and new secondary phases formation such as ZrN, h-BN, and (Zr,Ti)B2 solid solutions were approved employing crystalline phase analysis and microstructural studies. Improvement of densification and restriction of grain growth caused enhancement of mechanical characteristics. The measured values of Vickers hardness and fracture toughness are ameliorated from 7.8 GPa and 1.5 MPa.m1/2 to 14.1 GPa and 3.8 MPa.m1/2, respectively.In the present work, densification behavior and mechanical features (fracture toughness and Vickers hardness) of undoped and TiN-doped ZrB2 ceramic materials, hot-pressed at 1800 °C under 15 MPa for 1 h, were studied. The addition of only 5 wt% TiN into ZrB2 has resulted in an increase in its relative density from 83% to 90%. Removal of oxide contaminations like B2O3 via chemical reactions with TiN and new secondary phases formation such as ZrN, h-BN, and (Zr,Ti)B2 solid solutions were approved employing crystalline phase analysis and microstructural studies. Improvement of densification and restriction of grain growth caused enhancement of mechanical characteristics. The measured values of Vickers hardness and fracture toughness are ameliorated from 7.8 GPa and 1.5 MPa.m1/2 to 14.1 GPa and 3.8 MPa.m1/2, respectively.
Influence of TiN addition on densification behavior and mechanical properties of ZrB2 ceramics Keywords:
Influence of TiN addition on densification behavior and mechanical properties of ZrB2 ceramics authors