Effect of concentric and eccentric porous layer on forced convection heat transfer and fluid flow around a solid cylinder.
Publish place: Journal of Computational and Applied Research in Mechanical Engineering، Vol: 13، Issue: 2
Publish Year: 1403
نوع سند: مقاله ژورنالی
زبان: English
View: 25
This Paper With 16 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCARME-13-2_006
تاریخ نمایه سازی: 26 فروردین 1403
Abstract:
In this paper, heat transfer and fluid flow around a solid cylinder wrapped with a porous layer in the channel were studied numerically by computational fluid dynamics (CFD). The homogeneous concentric and eccentric porous medium round a rigid, solid cylinder are supposed at local thermal equilibrium. The transport phenomena within the porous layer, volume averaged equations were employed, however the conservation laws of mass, momentum and energy were applied in the channel. The main purpose of this study is analyzed and compared the heat flux of concentric and eccentric porous layer in Reynolds number range of ۱ to ۴۰ and Darcy numbers of ۱۰-۲ to ۱۰-۶. It is found that with the decline of Darcy number, the vortex length is increased behind the solid cylinder surface. In addition, the heat flux rate of the cylinder is raised with the increase of Reynolds number. Finally, the results showed that the average Nusselt numbers in different Darcy and Reynolds numbers are higher in the eccentric porous layer than in the concentric porous layer. For example, our findings show that in Da=〖۱۰〗^(-۵), Re=۴۰ and d=۰.۰۷ m, the average Nusselt number in the eccentric porous layer is ۷.۵% higher than the concentric porous layer.
Keywords:
Authors
Alireza Alinezhad
Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, ۷۶۱۸۸۶۸۳۶۶, Iran
Ataallah Soltani Goharrizi
Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, ۷۶۱۸۸۶۸۳۶۶, Iran
Ataallah Kamyabi
Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, ۷۶۱۸۸۶۸۳۶۶, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :