سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Engineering and Durability Properties of Modified Coconut Shell Concrete

Publish Year: 1401
Type: Journal paper
Language: English
View: 105

This Paper With 20 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_CEJ-8-2_013

Index date: 20 April 2024

Engineering and Durability Properties of Modified Coconut Shell Concrete abstract

Making low-cost concrete from coconut shell ash and coconut shell aggregate increases sustainability and reduces pollution. This research investigates untreated Coconut Shell Particles (CSP) incorporated with coconut shell ash (CSA) to improve the durability properties at elevated temperatures and in sulphuric acid. Initially, the physical and mechanical properties of cube and cylinder specimens after 7, 28, 56, and 90 days of moist curing were studied. The durability properties were then carried out after the pozzolanic component of CSA in modified concrete was activated. CSA and CSP were used as partial substitutes for ordinary Portland cement and coarse aggregate in class 30 concrete with a constant water to cement ratio of 0.55. Concrete mixes included control, 5% CSP, 10% CSA, and a mixture of 5% CSP incorporated with 10% CSA. According to test results, adding 10% of CSA to CSP concrete decreased the workability, density, and water absorption properties compared to the rest of the concrete mixes. However, these results were within acceptable limits. The compressive strength of 10% CSA concrete at 90 days of moist curing was reduced by 3.23% when 5% CSP was added compared to control. The addition of 10% of CSA to 5% CSP concrete improved the split tensile strength by 2.76% higher than concrete with only 5% CSP. Concrete containing the combination of 10% CSA and 5% CSP showed a 9.37% increment in the split tensile strength compared to concrete having only 5% CSP after sulphuric acid exposure. Also, the compressive strength of 10% CSA and 5% CSP concrete improved by 30.7% when the temperature was elevated to 500 °C for 1 hour compared to the control concrete. Moreover, the reduction in the compressive strength after exposure to the elevated temperature of 500 °C for 1 hr. was still much less by an average of 75.38% compared to other waste materials blended into the concrete by previous works. Doi: 10.28991/CEJ-2022-08-02-013 Full Text: PDF

Engineering and Durability Properties of Modified Coconut Shell Concrete Keywords:

Engineering and Durability Properties of Modified Coconut Shell Concrete authors

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Tan, Y. Y., Doh, S. I., & Chin, S. C. ...
Patel, A. J., Patel, V. M., & Patel, M. A. ...
Azeez, S., Raju, R., & Pillai, P. S. (2015). Partial ...
McCarthy, M. J., & Dyer, T. D. (2019). Pozzolanas and ...
Shraddhu, S. (2021). Types of Pozzolanic Materials /Admixtures/Concrete Technology. Engineering ...
Sargent, P. (2015). The development of alkali-activated mixtures for soil ...
Bergado, D. T., Anderson, L. R., Miura, N., & Balasubramaniam, ...
Bassuoni, M. T., & Nehdi, M. L. (2007). Resistance of ...
Attiogbe, E. K., & Rizkalla, S. H. (1988). Response of ...
Rafeeq Ahmed, S., & Munirudrappa, N. (1998). Effect of sulphuric ...
Aydın, S., Yazıcı, H., Yiğiter, H., & Baradan, B. (2007). ...
Monteny, J., De Belie, N., Vincke, E., Verstraete, W., & ...
Torii, K., & Kawamura, M. (1994). Effects of fly ash ...
Roy, D. M., Arjunan, P., & Silsbee, M. R. (2001). ...
Koushkbaghi, M., Kazemi, M. J., Mosavi, H., & Mohseni, E. ...
Jerlin Regin, J., Vincent, P., & Ganapathy, C. (2017). Effect ...
BS 8110-1. (1997). Structural use of concrete-Part 1: code of ...
Guo, Z., & Shi, X. (2011). Experiment and calculation of ...
Yang, H., Zhao, H., & Liu, F. (2018). Residual cube ...
Shety, M. S. (2014). Concrete technology-theory and practice (6th Ed.). ...
Osuji, S., & Ukeme, U. (2015). Effects of Elevated Temperature ...
Asadi, I., Shafigh, P., Hassan, Z. F. B. A., & ...
Sukontasukkul, P., Uthaichotirat, P., Sangpet, T., Sisomphon, K., Newlands, M., ...
Mathew, S. P., Nadir, Y., & Arif, M. M. (2020). ...
Gunasekaran, K., Annadurai, R., & Kumar, P. S. (2015). A ...
BS EN 197-1. (2000). Cement. Composition, specifications and conformity criteria ...
Popovics, S. (1992). Concrete Materials: Properties, Specifications and Testing (2nd ...
BS EN 1097. (2013). Test for Mechanical and Physical Properties ...
BS 882. (1992). Specification for Aggregates from Natural Sources for ...
Orasugh, J. T., Ghosh, S. K., & Chattopadhyay, D. (2020). ...
Lin, P. C., Lin, S., Wang, P. C., & Sridhar, ...
Zaid, O., Ahmad, J., Siddique, M. S., Aslam, F., Alabduljabbar, ...
BS 1881-103. (1993). Testing concrete-Part 103: Method for determination of ...
BS 1881-102. (1983). Testing concrete -Part 102: Method for determination ...
ASTM C267. (2020). Standard Test Methods for Chemical Resistance of ...
Allawi, A. A., & Ali, S. I. (2020). Flexural Behavior ...
Duy Nguyen, P., Hiep Dang, V., Anh Vu, N., & ...
Alengaram, U. J., Jumaat, M. Z., & Mahmud, H. (2008). ...
Gunasekaran, K., Annadurai, R., & Kumar, P. S. (2012). Long ...
Ann Adajar, M., Galupino, J., Frianeza, C., Faye Aguilon, J., ...
Bayasi, Z., & Soroushian, P. (1989). Optimum use of pozzolanic ...
Bheel, N., Mahro, S. K., & Adesina, A. (2021). Influence ...
Iffat, S. (2015). Relation between density and compressive strength of ...
Kanojia, A., & Jain, S. K. (2017). Performance of coconut ...
Gunasekaran, K., Kumar, P. S., & Lakshmipathy, M. (2011). Mechanical ...
Adesina, A., & Awoyera, P. (2019). Overview of trends in ...
Awoyera, P. O., Adesina, A., & Gobinath, R. (2019). Role ...
Bheel, N., Memon, A. S., Khaskheli, I. A., Talpur, N. ...
Yerramala, A., & Ramachandrudu, C. (2012). Properties of concrete with ...
Prakash, R., Thenmozhi, R., Raman, S. N., Subramanian, C., & ...
Kumar, V. R. P., Gunasekaran, K., & Shyamala, T. (2019). ...
BS 1881: Part 122. (1983). Testing concrete Part 122, Methods ...
Tomar, R., Kishore, K., Singh Parihar, H., & Gupta, N. ...
Mo, K. H., Mohd Anor, F. A., Alengaram, U. J., ...
Subaşi, S. (2009). The effects of using fly ash on ...
Prakash, R., Thenmozhi, R., & Raman, S. N. (2019). Mechanical ...
Chakradhara Rao, M. (2021). Influence of brick dust, stone dust, ...
Ibrahim, R. K., Ramyar, K., Hamid, R., & Taha, M. ...
Ibrahim, M. J. Garba, A. S. J. Smith, B. Muhammad, ...
Shetty, M. S. (2000). Concrete Technology Theory and Practice (4th ...
Raju, P. S. N., & Dayaratnam, P. (1984). Durability of ...
Wegian, F. M. (2010). Effect of seawater for mixing and ...
Ge, Z., Wang, Y., Sun, R., Wu, X., & Guan, ...
Joorabchian, S. M. (2010). Durability of concrete exposed to sulfuric ...
Shi, C., & Stegemann, J. A. (2000). Acid corrosion resistance ...
Khoury, G. A. (2000). Effect of fire on concrete and ...
Taylor, H. F. (1997). Cement chemistry. Thomas Telford, London, United ...
Mwilongo, K. P., Machunda, R. L., & Jande, Y. A. ...
Xu, Y., Wong, Y. L., Poon, C. S., & Anson, ...
Fares, H., Noumowe, A., & Remond, S. (2009). Self-consolidating concrete ...
نمایش کامل مراجع