Innovative Method for Reinforcing Beams with Different Types of Concrete Using Cross-Rod Steel Bracing Under Pure Torsion

This study aimed to investigate the effectiveness of an innovative way to reinforce the concrete beams using cross-rod steel bracing under pure torsion. The experimental program consists of casting and testing eighteen concrete beams made of three types of concrete in the form of three groups, with the same dimensions for all beams (۲۰۰×۲۰۰×۲۰۰۰) mm. The parameters of the study included concrete types (normal strength, high strength, and steel fiber), as well as the number of internally cross rods (۴, ۸, ۱۲, ۱۶, ۲۰). The experimental results showed that the number of internally cross-rod reinforcements and concrete type had an effect on ultimate torque, crack width, toughness, and stiffness. The torsional capacity of all concrete beams increased with the increase in internally cross-rod reinforcement. The ultimate torque of normal-strength concrete beams, high-strength concrete beams, and steel fiber concrete beams reinforced with twenty internally cross rods increased (۸۸.۳۴%, ۵۳.۲۰%, and ۴۰.۶۰%), respectively, compared to beams without cross rods in each type of concrete beam. Increasing the internally cross rod in all concrete beams effectively inhibited the development of crack width and improved torsional stiffness, especially in fibrous concrete beams that contained steel fiber. The torsional toughness of all concrete beams increased with the increase of internally cross-rod reinforcement, and it was higher in steel fiber concrete beams. The steel fiber concrete beams reinforced with internally cross-rod steel bracing have better torsional properties compared to ordinary concrete beams and high-strength concrete beams. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۴-۰۱۰-۰۴-۰۶ Full Text: PDF

Keywords:

Cross-Rod Steel Reinforcement , Normal Strength Concrete Beams , High Strength Concrete Beams , Steel Fiber Concrete Beams , Ultimate Torsional Capacity , Torsional Stiffness , Torsional Toughness.