Parametric Study of Single Pass Mode Capacitive Deionization

Ahmad Jamali Keikha; Amin Behzadmehr; Abouzar Ebrahimi; Massoud Kaykhaii; Tahereh Fanaei Sheikholeslami

Parametric Study of Single Pass Mode Capacitive Deionization

Publish place: Challenges in Nano and Micro Scale Science and Technology، Vol: 10، Issue: 1

Publish Year: 1401

Type: Journal paper

Language: English

This Paper With 7 Page And PDF Format Ready To Download

DOWNLOAD Paper

Certificate
I'm the author of the paper

Export:

Link to this Paper:

https://civilica.com/doc/1995770

Document National Code:

JR_CHAL-10-1_004

Index date: 9 June 2024

Parametric Study of Single Pass Mode Capacitive Deionization abstract

Abstract: Due to the ever-increasing human need for potable water, and the limited available resources, various methods of fresh water production have been developed. One of these methods is capacitive deionization which is used in two modes of single pass and batch. In this article, single pass mode capacitive deionization is numerically investigated. A numerical code for simulation the process was developed and validated with some experimental results that are available in the literature. Different effective parameters include applying voltage, feed water flowrate, electrode capacitance, feed concentration and cell volume are considered and their effects on the CDI performance are presented and discussed. Results show that the electrode capacitance is the most important parameter of desalination in CDI technology. Therefore, future research should be dedicated to develop the electrodes’ electrical and physical properties such as electrode capacitance and its porosity.Keywords: Capacitive Deionization Technology, Single Pass Mode, Desalination, Electrode Capacitance

Parametric Study of Single Pass Mode Capacitive Deionization Keywords:

Capacitive Deionization , Single Pass Mode , Desalination

Parametric Study of Single Pass Mode Capacitive Deionization authors

Ahmad Jamali Keikha

Mechanical Engineering, University of Sistan and Baluchestan

Amin Behzadmehr

Department of Mechanical Engineering, University of Sistan and Baluchestan

Abouzar Ebrahimi

Department of shipbuilding engineering, Faculty of Marine Engineering, Chabahar Maritime University

Massoud Kaykhaii

School of Natural Sciences (Chemistry), College of Sciences and Engineering, University of Tasmania

Tahereh Fanaei Sheikholeslami

Department of Mechanical Engineering, Faculty of Engineering, University of Sistan and Baluchestan