سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Improving energy efficiency and heat recovery performance in paper machine drying section

Publish Year: 1403
Type: Journal paper
Language: English
View: 73

This Paper With 16 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_JCARME-14-1_004

Index date: 18 November 2024

Improving energy efficiency and heat recovery performance in paper machine drying section abstract

In this study, the energy assessment and heat recovery analysis of the multi-cylinder drying section were carried out in a fluting paper machine. The specific heat consumption per unit of paper was determined to be about 4.7 GJ/ton of paper and accordingly, the machine consumed about 1.71 tons of steam per ton of produced paper. The temperature efficiency of the heat exchanger and the recovering efficiency of the heat recovery system within the paper machine have been determined to be about 50% and 4%, respectively. The results show that the steam used in the heat recovery system can be reduced by about 0.95 tons/h due to adjusting the supply air temperature to the optimum range, which corresponds to about a 5.2% reduction in energy input and 4% improvement in dryer efficiency resulting nearly 31,000 savings per year. Also, the CO2 emission due to gas use can be decreased by about 925 tons/y.

Improving energy efficiency and heat recovery performance in paper machine drying section Keywords:

Improving energy efficiency and heat recovery performance in paper machine drying section authors

Shaaban Ghodbanan

Chemical Engineering Faculty, Sahand University of Technology, Tabriz

Reza Alizadeh

Chemical Engineering Faculty, Sahand University of Technology, Tabriz, Iran

Sirous Shafiei

Chemical Engineering Faculty, Sahand University of Technology, Tabriz, Iran

Javad Rahbar Shahrouzi

Chemical Engineering Faculty, Sahand University of Technology, Tabriz, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Y.K. Yeo, K.S. Hwang, S. Yi, and H. Kang, “Modeling ...
S.A. Reardon, “Simulation of Paper Drying Energy Consumption”, Ph.D. Thesis, ...
L. Kong and H. Liu, “A Static Energy Model of ...
C. H. Heo, H. Cho, and Y. K. Yeo, “Dynamic ...
C. Huh and Y. K. Yeo, “Dynamic Modeling of the ...
“Technical Paper Series, Process Engineering – Metso As Your Drying ...
J. Goran, T. Nikola, S. Mirjana and A. I. Vuk, ...
J. Laurijssen, F. J. De Gram, E. Worrell and A. ...
Sh. Ghodbanan, R. Alizadeh and S. Shafiei, “Steady-State Modeling of ...
A. K. Ghosh, “Fundamentals of Paper Drying – Theory and ...
A. Ali, “Improving dryer performance: converting from rotating siphons to ...
T. Kudra, “Energy Aspects in Drying”. Drying Tech., Vol. ۲۲, ...
J. Laurijssen, A. Faaij and E. Worrell, “Benchmarking Energy Use ...
P. C. Austin, J. Mack, M. McEwan, P. Afshar, M. ...
E. Rissanen, “Metso Technical Paper Report, Testing and Analyzing of ...
Sh. Ghodbanan, “Comprehensive Study and Steady State Modeling of Multi-Cylinder ...
L. Sivill, P. Ahtila and M. Taimisto, “Thermodynamic Simulation of ...
Sh. Ghodbanan, R. Alizadeh, and S. Shafie, “Optimization for Energy ...
Sh. Ghodbanan, R. Alizadeh, and S. Shafiei, “Thermodynamic and Heat ...
E. Lam, “Energy Analysis of the Drying Hood in Paper ...
نمایش کامل مراجع