بررسی فرآیند ازدیاد برداشت نفت با استفاده از امواج اولتراسونیک: تحلیل عددی
Publish Year: 1401
Type: Journal paper
Language: Persian
View: 48
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- I'm the author of the paper
Export:
Document National Code:
JR_ARCPE-6-4_006
Index date: 30 December 2024
بررسی فرآیند ازدیاد برداشت نفت با استفاده از امواج اولتراسونیک: تحلیل عددی abstract
Research topic: One of the new methods in the processes of increasing oil recovery from hydrocarbon reservoirs is the method of using ultrasonic waves. In this research, using ultrasonic waves and their application in a large-scale sample tank, its effect on increasing oil extraction by the numerical method is investigated.
Research Method: In this research, the modeling process has been performed using MATLAB software. First, by determining the porous environment, the amount of pressure increases due to ultrasonic waves due to solving the sound equations (Helmholtz) by MATLAB k-waves toolbox is investigated. Finally, considering the cumulative production at a specific time from the production well and determining the oil recovery from the reservoir in the presence of a wave, to examine the effect of well location parameters and its distance from the wave generation source, wave production starts time, wave application methods (Pulsed and continuous), is performed at an optimal frequency and power.
Main results: According to the modeling results, the closer the wave start time is to the first days of production, the higher the oil recovery rate; So that by starting the application of ultrasonic wave under the power of ۵ kW and frequency ۲۰ kHz simultaneously with the production of well oil from the first day, oil recovery compared to oil recovery in the case of starting the wave from the fifty and ninety days, respectively ۴/۵% and ۸% more. Oil recovery is ۱.۸% higher if the wave is applied continuously to the reservoir at a given time than when pulsed at the same time. The modeling results show that the shorter the distance between the wave source and the production well, the lower the pressure drop in the reservoir area and the higher the oil recovery. According to the results, if the source of wave production is located at a distance of ۲۰۰ feet from the production well, it will increase by ۷.۱% compared to the distance of ۱۸۰۰ feet from the oil recovery well.
بررسی فرآیند ازدیاد برداشت نفت با استفاده از امواج اولتراسونیک: تحلیل عددی Keywords:
enhanced oil recovery , ultrasonic waves , simulation and modeling , Cumulative rate , pressure change , ازدیاد برداشت , امواج اولتراسونیک , شبیه سازی و مدلسازی , دبی تجمعی , تغییرات فشار
بررسی فرآیند ازدیاد برداشت نفت با استفاده از امواج اولتراسونیک: تحلیل عددی authors
سید مهدی آقایی
Department of Chemical Engineering, Tarbiat Modares University
فرامرز نصیرزاده
Department of Chemical Engineering, Tarbiat Modares University
آرزو جعفری
Department of Chemical Engineering, Tarbiat Modares University
داود خوزان
Department of Chemical Engineering, Tarbiat Modares University
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :