سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

استفاده از روش میکرومکانیک خودسازگار بهبود یافته در پیش بینی رفتار تنش-کرنش نانوکامپوزیت های الاستومری با استفاده از تئوری افزایشی

Publish Year: 1402
Type: Journal paper
Language: Persian
View: 60

This Paper With 8 Page And PDF Format Ready To Download

Export:

Link to this Paper:

Document National Code:

JR_MME-23-8_003

Index date: 28 February 2025

استفاده از روش میکرومکانیک خودسازگار بهبود یافته در پیش بینی رفتار تنش-کرنش نانوکامپوزیت های الاستومری با استفاده از تئوری افزایشی abstract

هدف از این تحقیق توسعه روش های میکرومکانیک کلاسیک و استفاده از آنها در ارائه مدل ساختاری نانوکامپوزیت های الاستومری با استفاده از تئوری افزایشی می باشد. برای این منظور با استفاده از مفهوم کرنش ویژه، مدل بهبود یافته خود سازگار جهت پیش بینی خواص الاستیک نانوکامپوزیت ها ارائه می شود. همچنین با  استفاده از این مدل روابط مربوط به مدل ساختاری متکی بر تئوری افزایشی جهت پیش بینی رفتار تنش-کرنش نانوکامپوزیت های الاستومری ارائه می شود. در ادامه نتایج حاصل از حل مدل های تئوریک با نتایج حاصل از آزمون های تجربی و نتایج منتشر شده در متون علمی مقایسه می شود. بررسی نتایج نشان داده است مدل ساختاری توسعه یافته متکی بر روش میکرومکانیک خودسازگار بهبودیافته می تواند رفتار تنش کرنش نانوکاموزیت های الاستومری را در درصدهای بالا از نانوذرات تقویت کننده با دقت خوبی پیش بینی نماید.

استفاده از روش میکرومکانیک خودسازگار بهبود یافته در پیش بینی رفتار تنش-کرنش نانوکامپوزیت های الاستومری با استفاده از تئوری افزایشی Keywords:

استفاده از روش میکرومکانیک خودسازگار بهبود یافته در پیش بینی رفتار تنش-کرنش نانوکامپوزیت های الاستومری با استفاده از تئوری افزایشی authors

محمدحسین کریمی دونا

Iran University of Science and Technology

بیژن محمدی

Iran University of Science and Technology

فتح اله طاهری بهروز

Iran University of Science and Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
Mullins, L. and N. Tobin, Stress softening in rubber vulcanizates. ...
Bilisik, K. and M. Akter, Graphene nanoplatelets/epoxy nanocomposites: A review ...
Clement, F., L. Bokobza, and L. Monnerie, Investigation of the ...
Das, A., et al., Rubber composites based on graphene nanoplatelets, ...
Hou, B., et al., Rapid preparation of expanded graphite at ...
Bergstrom, J.S. and M.C. Boyce, Mechanical behavior of particle filled ...
Boutaleb, S., et al., Micromechanics-based modelling of stiffness and yield ...
Kundalwal, S. and S. Meguid, Multiscale modeling of regularly staggered ...
Moore, J.A., et al., An efficient multiscale model of damping ...
Yang, S., et al., Nonlinear multiscale modeling approach to characterize ...
Cantournet, S., M. Boyce, and A. Tsou, Micromechanics and macromechanics ...
Cantournet, S., R. Desmorat, and J. Besson, Mullins effect and ...
Österlöf, R., H. Wentzel, and L. Kari, An efficient method ...
Österlöf, R., et al., Constitutive modelling of the amplitude and ...
Shokrieh, M., et al., Effect of graphene nanosheets (GNS) and ...
Pavlov, A.S. and P.G. Khalatur, Filler reinforcement in cross-linked elastomer ...
Peng, B., et al., Measurements of near-ultimate strength for multiwalled ...
Voigt, W., Theoretical studies of the elastic behaviour of crystals. ...
Reuß, A., Berechnung der fließgrenze von mischkristallen auf grund der ...
Eshelby, J.D., The determination of the elastic field of an ...
Mura, T., Micromechanics of defects in solids. ۲۰۱۳: Springer Science ...
Mori, T. and K. Tanaka, Average stress in matrix and ...
Benveniste, Y., A new approach to the application of Mori-Tanaka's ...
Lu, P., Further studies on Mori–Tanaka models for thermal expansion ...
Sadeghpour, E., et al., A modified Mori–Tanaka approach incorporating filler-matrix ...
Ghahramani, P., et al., Theoretical and experimental investigation of MWCNT ...
Zhu, F., C. Park, and G. Jin Yun, An extended ...
Yun, G.J., et al., A damage plasticity constitutive model for ...
Christensen, R. and K. Lo, Solutions for effective shear properties ...
Anoukou, K., et al., On the overall elastic moduli of ...
Mansouri, M. and H. Darijani, Constitutive modeling of isotropic hyperelastic ...
Xiao, J., Y. Xu, and F. Zhang, Generalized self-consistent electroelastic ...
Xiong, Z., et al., A combined self-consistent method to estimate ...
Zhang, B., X. Yu, and B. Gu, A generalized self-consistent ...
Jiang, Y. and H. Fan, A micromechanics model for predicting ...
Yang, H., et al., Micromechanics models of particulate filled elastomer ...
Karimi Dona, M.H., F. Tahri‐behrooz, and B. Mohammadi, A modified ...
نمایش کامل مراجع