PREDICTION OF WORK ROLL INITIAL CROWN ACCORDING TO DESIRED STRIP PROFILE IN HOT ROLLING
Publish Year: 1390
نوع سند: مقاله ژورنالی
زبان: English
View: 869
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-25-1_009
تاریخ نمایه سازی: 17 خرداد 1393
Abstract:
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regressionmodels are proposed to predict the roll force, the roll wearing crown and the roll thermal crown usingexperimental data provided by Mobarake Steel Complex (MSC). The Euler-Bernoulli beam theorybased on elasticity approach is also used to predict the roll bending and flattening crown. Finally, thework roll initial crown in order to obtain desired strip profile in hot rolling is predicted utilizing acomputer programming. The obtained initial crowns are then used for seven stands of an actual roll schedule for hot strip mill of MSC. The measured strip profile shows a good agreement with the desired one for the mentioned mill.
Keywords:
Authors
h.s salavati pour
Department of Mechanical Engineering, Amirkabir University of Technology, Hafez Ave., Tehran ۱۵۹۱۶-۳۴۳۱۱, Iran
h khadem hosseini beheshti
Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Iran
m poursina
Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Iran