Experimental Investigation for Simulating High Power Laser Perforation under Pressure
Publish place: 3rd Iranian Petroleum Engineering Congress
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 846
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IPEC03_017
تاریخ نمایه سازی: 7 تیر 1393
Abstract:
Procedure: Initial tests were performed on cores of Berea sandstone and limestone under various conditions of axial, pore and confining pressures. For all cases, the laser settings remained the same.Full output power of 3.5 kW was applied continuously to each sample through the sapphire window of the pressure cell with a focused beamdiameter of 0.889 cm (0.35 in)over 8.0 s. The amount of laser exposure time was calculated from previous laser rock interactions to allow penetration into the core without risk of penetrating the core’s full length and avoiding possible damage to the pressure cell.
Keywords:
Perforation - Laser - Sandstone - Limestone
Authors
Mahdi Bakhtbidar
Young Researchers Club, Omidieh Branch, Islamic Azad University, Omidieh, Iran
Gholamhossein Montazeri
Dept. of Chemical & Petroleum Engineering, Mahshahr Branch, Islamic Azad University, Mahshahr, Iran
Amin Safaei
Dept. of Petroleum Engineering, Omidieh Branch, Islamic Azad University, Omidieh, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :