Optimization of Operating Parameters of Continuous Catalytic Naphtha Reforming Process using Response Surface Methodology
Publish place: 07th International Congress on Chemical Engineering
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 569
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_324
تاریخ نمایه سازی: 25 فروردین 1394
Abstract:
Optimization of the operating parameters of continuous catalytic naphtha reforming process including temperature, pressure and hydrogen to hydrocarbon ratio was conducted using a response surface methodology for a unit with three or four beds to achieve to the highest reformate yield and research octane number (RON). The results were analysed by Analysis of Variance (ANOVA) to realize the significant effect of the operational parameters and their interactions on the reformate yield and RON. Taking 95% confidence level into account, each factor with a significant level of lower than 5% can be regarded as a significant factor. The ANOVA was performed with the help of statistical software, Design Expert 8. It was concluded that using three reactors instead of four, required around 17k increase in the inlet temperature of the reactors to approach to the same industrial target of RON and yield of reformate
Keywords:
Authors
Behnam Taghavi
Department of Chemical Engineering, Faculty of Engineering,University of Tehran, Tehran, Iran
Shohreh Fatemi
Department of Chemical Engineering, Faculty of Engineering,University of Tehran, Tehran, Iran
Seyed Mojtaba Razavi
Bandar Abbas Oil Refining Co., Bandar Abbas, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :